SAR Custom Shop - Galloway Precision

[jwc007]

For any of you looking for parts to Customize your SAR Pistols and maybe some of the Polymer Tanfoglio's, Galloway Precision is now a source and will do Custom Work.
The +2 Magazine Extensions for the SAR K2-45 are on my "wants" list.

https://gallowayprecision.com/

https://youtu.be/cggf7Op2IZM

[Gunnerdad80]

NICE! I just purchased two SAR9’s, one stainless and one all black, and I’ve been checking out Galloway but haven’t seen that video. Thanks jwc007. I’m picking them up today when I get off work.

[jwc007]

NICE! I just purchased two SAR9’s, one stainless and one all black, and I’ve been checking out Galloway but haven’t seen that video. Thanks jwc007. I’m picking them up today when I get off work.

You are most Welcome! 

Note, I've used some of their parts on my S&W SW9VE and they worked out very well!

Also note that at my invitation, a rep from Galloway Precision is now a member of this forum.

[GallowayPrecisiobn]

 

[Gunnerdad80]

Welcome!

[mjr1967]

Good info, Thank you!

[Wheeled_and_Well_Armed]

After shooting 500 rounds I polished all the internal parts and added the Galloway Precision spring kit. The K12 Sport trigger is perfect. It pulls a consistent 2 lbs 6 oz.
https://www.youtube.com/watch?v=aHgGcwJiySY

[PPS1980]

I've been very happy with the parts from Galloway that I have used in various pistols.  I just installed an extender on my P239 and, again, am happy with it.  I had no idea that they have a K2-45 parts area until seeing it here.

[dudester]

 Very cool of you to do this. How about some replacement sights?

[Bhert213]

Heads up on using the Galloway Precision reduced power spring kit on a SAR K2.  After installing the kit I ended up getting 2-3 light primer strikes per magazine.  I used 3 different types of ammo and same results.  When I re installed the stock hammer spring the problem went away but it increased the trigger pull by a few pounds.   Finally I found a large frame tanfoglio extended firing pin from Patriot Defense that solved the problem when using the reduced power hammer spring from Galloway. 

I should also add that after this problem was solved my K2 is now one of my favorite .45’s to shoot.  Very light trigger pull, slightly longer than my 97. Smooth action and 14rds is nice.   

[Oldskool86]

Heads up on using the Galloway Precision reduced power spring kit on a SAR K2.  After installing the kit I ended up getting 2-3 light primer strikes per magazine.  I used 3 different types of ammo and same results.  When I re installed the stock hammer spring the problem went away but it increased the trigger pull by a few pounds.   Finally I found a large frame tanfoglio extended firing pin from Patriot Defense that solved the problem when using the reduced power hammer spring from Galloway. 

I should also add that after this problem was solved my K2 is now one of my favorite .45’s to shoot.  Very light trigger pull, slightly longer than my 97. Smooth action and 14rds is nice.

I recently bought the reduced spring kit too, back in January. I had the same issue with light primer strikes and changed the hammer spring back to stock. Where did you find the longer firing pin?

[Philipl]

Galloway milled a Sig 320 c slide for me to put a Trijicon red dot on. Did a perfect job. The sight and the milling cost more than the pistol

[Bhert213]

https://patriotdefense.com/patriot-defense-firing-pin-extended-lf/