CZ-75 Triple Longslide Nickel Boron HIGH POLISH 9mm 22LR Shadow 2 Kadet Racegun

[MuayThaiJJ]

• Several years in the making, some of you may think it's blasphemy doing this to a classic CZ 75, but...
• I have never seen a CZ high polish racegun, let alone a high polish CZ 75 iron sight open longslide racegun, so I decided to make Full-size, LS-P (Long Slide), and Longslide Kadet versions.
  
• I didn't want to chop the slides up so this is my solution on how to make a CA compliant CZ-75B with non-threaded compensated top end uppers.
• I also really like the properties of Nickel Boron plating. It helps protect the metal against corrosion and has a high lubricity factor, so I didn't need to polish the internals. It made the DA much smoother and brought the trigger pull way down. Also, it makes the metals, especially aluminum - MUCH harder.
  

Full video below...

It started off as a bone stock CZ-75B circa 2015 and after thousands of rounds...
SA trigger pull 6#

_________________________________________________
Phase 1 mods Winter 2020

• Nickel Boron High Polish plating by Ron Mahovsky
  
• CGW short reset
• CGW disconnector
• CGW Race hammer
• CZC H-TAC Tritium sights
• CZC Aggressive grips

SA trigger pull 2.5#


_________________________________________________
Phase 2 mods Summer 2021:

• SSI Scale 2.0 grips
  
• Shadow 2 mag release
• Extended D-style safety
• Slide Stop Thumb Rest
  
• Removed FPB and Added Sear Spacer
• Fiber optic front/Blackout rear competition sights

SA trigger pull 2#


_________________________________________________
Phase 3 mods Fall 2021:

• Satin Aluminum cerakote controls (Sagisi Customs)
  
• CZC extended firing pin

_________________________________________________
FINAL Phase Winter 2021:

• UPPER #1: CZ 75B 4.6" slide with 6" barrel
  
• UPPER #2: CTS LS-P 5.2" slide, Custom stainless steel recoil plug by Eagle Mike, Kensight Adj Rear/Dawson FO front sights, and CGW extended firing pin.
  
• UPPER #3: Shadow 2 Kadet 5" slide with CZC bolt-on compensator and FO front sight.
  
• CZ-USA aluminum magwell
• Eemann Tech Back-Shifted Trigger (RED)
• Tanfoglio Sear Spring swap - SA trigger pull to 3#, DA to 6.5#
  
• Nickel Boron plated by Ron Mahovsky
  

FULL VIDEO and RANGE FOOTAGE HERE:
https://youtu.be/7n8lkpZIcjE

[Dusty]

I wouldn't call it blasphemy, you didn't start with a pre-b or a short frame. Have at it!

[Gunnerdad80]

B-E-A-U-T-I-F-U-L!!! I was just talking about this the other day. I wanna nickel boron coat several gun parts. Is it extremely expensive?

[MuayThaiJJ]

B-E-A-U-T-I-F-U-L!!! I was just talking about this the other day. I wanna nickel boron coat several gun parts. Is it extremely expensive?

No
http://www.mahovskysmetalife.com/

Contact Ron via phone, and tell him Nick with the CZs sent you, he will take care of you!

[Gunnerdad80]

B-E-A-U-T-I-F-U-L!!! I was just talking about this the other day. I wanna nickel boron coat several gun parts. Is it extremely expensive?

No
http://www.mahovskysmetalife.com/

Contact Ron via phone, and tell him Nick with the CZs sent you, he will take care of you!

Awesome, thanks!

[Mtb1083]

The stainless recoil plug from eagle mike...you mean the plug for the recoil spring? Replacing the cheap plastic one that comes with the 9mm tactical sports slide? If so I'm looking for one as well. I didn't see anything about firearms on his site. Did you contact him about making one?

[schutz85C]

Muay, I am always impressed by your offerings!

So, you have fitted three uppers onto one frame for interchangeability?  Just saw vid- OK answered.

I wonder how difficult it was for you to fit the TS upper onto the 75B frame? (similar to fitting a Bull Shadow upper hypothetically?)  Just saw vid- OK answered. You bought slide already fitted for a 75B frame.

Did you fit the long barrel for the 75B set up? Is it a 75B diameter barrel or an SP-01 long barrel with corresponding fitting?

Final products look great !

Kudos to your adventurous projects. Thanks for the vid!

[Phlyers13]

That is awesome!

[MuayThaiJJ]

The stainless recoil plug from eagle mike...you mean the plug for the recoil spring? Replacing the cheap plastic one that comes with the 9mm tactical sports slide? If so I'm looking for one as well. I didn't see anything about firearms on his site. Did you contact him about making one?

yes hit up Eagle Mike directly I asked him to make some for me and a bunch of shooters


Sent from my iPhone using Tapatalk

[MuayThaiJJ]

Muay, I am always impressed by your offerings!

So, you have fitted three uppers onto one frame for interchangeability?  Just saw vid- OK answered.

I wonder how difficult it was for you to fit the TS upper onto the 75B frame? (similar to fitting a Bull Shadow upper hypothetically?)  Just saw vid- OK answered. You bought slide already fitted for a 75B frame.

Did you fit the long barrel for the 75B set up? Is it a 75B diameter barrel or an SP-01 long barrel with corresponding fitting?

Final products look great !

Kudos to your adventurous projects. Thanks for the vid!

The 6” barrel is the one readily available from CZ USA and CZ custom, you can also hypothetically fit it into any other CZ like the SP01 or shadow 2 with a smaller barrel bushing since the outside diameter is .50”, I am exploring these more and making some custom long barrels for all my CZ slides stay tuned for more!


Sent from my iPhone using Tapatalk