« previous next »
Pages: [1]   Go Down

Author Topic: Magazine brake flat spring  (Read 1884 times)

0 Members and 1 Guest are viewing this topic.

Offline Obalu

  • Newbie
  • *
  • Posts: 2
Magazine brake flat spring
« on: February 17, 2023, 04:13:02 AM »
Please could anyone can help me on this ?
I have CZ 75 B,  I want to magazine free fall.
Should it done with CZ TS magazine flat spring or CZ SP-01 magazine flat spring ?

Thank you for everyone for a help.


Sent from my iPhone using Tapatalk
« Last Edit: February 17, 2023, 10:01:20 AM by Grendel »
Logged

Offline Ron IL

  • Jr. Member
  • **
  • Posts: 85
Re: Magazine brake flat spring
« Reply #1 on: February 17, 2023, 11:51:50 AM »
I did my P01 watching a video I found.  Just pull the spring plug out of bottom and take out the spring and brake.  Cut off the tab on the bottom of the brake and bend the brake flat.  Put it back together.  Mag will fall free.  If you want  the brake completely out you will have to drive out a pin.  Or just bend it in place.  That little tab you cut off at the bottom of the brake hooked into the bottom of the spring and that keeps tension on it.  Cutting off the tab lets it relax.
Logged
Ron
KB9TF
Retired Southern IL coalminer

Offline newageroman

  • Hero Member
  • *****
  • Posts: 1257
  • Press or cry like the rest...
    • The Brass Bucket - Brass Trading Website
Re: Magazine brake flat spring
« Reply #2 on: February 17, 2023, 12:07:04 PM »
the SP-01 should fit it. I put flat mag brakes in all my guns. they are only $7 but the shipping will get you if that's all your ordering. I supposed you could modify the existing brake like he said, and I'm all for modding and "improving" things.
hope that helps. enjoy your new CZ!
Logged
Ricky Ace Range Review: https://rumble.com/c/c-1388111
75B-BullShadow SAO (Limited Optics)
SP-01-SAO-comped (OpenMajor)
97E SAO, 97B, SAR copies
..others..

Offline Obalu

  • Newbie
  • *
  • Posts: 2
Re: Magazine brake flat spring
« Reply #3 on: February 17, 2023, 12:56:55 PM »
Thank you for reply.
I order this one ( CZ 75 TS)

https://www.ipscstore.com/en/cz/508-cz-75-ts-magazine-brake.html

I hope it can fit it correctly


Sent from my iPhone using Tapatalk
Logged

Offline SI VIS PACEM PARRABELLUM

  • Hero Member
  • *****
  • Posts: 5865
Re: Magazine brake flat spring
« Reply #4 on: February 17, 2023, 01:41:57 PM »
Quote from: Ron IL on February 17, 2023, 11:51:50 AM
I did my P01 watching a video I found.  Just pull the spring plug out of bottom and take out the spring and brake.  Cut off the tab on the bottom of the brake and bend the brake flat.  Put it back together.  Mag will fall free.  If you want  the brake completely out you will have to drive out a pin.  Or just bend it in place.  That little tab you cut off at the bottom of the brake hooked into the bottom of the spring and that keeps tension on it.  Cutting off the tab lets it relax.
Actually the tab has nothing to do with the mag brake relaxing. If your brake is arched you can straighten it and leave the tab in place. Everyone cuts the tab off because it's a pain in the tail to get back in place sometimes. The reason for the tab is it fits in the slot of the mainspring plug and keeps it from rotating.
Logged

Offline tdogg

  • Hero Member
  • *****
  • Posts: 2736
  • Two Alpha!
Re: Magazine brake flat spring
« Reply #5 on: February 20, 2023, 10:35:19 AM »
You can cut off the tab or order this more beefy version that won't get waded up in the frame:  https://czcustom.com/cz-parts-all/mag-releases-brakes/cz-75-ts-mag-brake-stainless.html

https://czfirearms.us/index.php?topic=67390.msg461926#msg461926

Cheers,
Toby
Logged
This forum rocks!
Pages: [1]   Go Up
« previous next »