Improved Firing Pin SPRINGS for Kadet

[MuayThaiJJ]

I ordered a bunch of these springs to help with Kadet ignition.
Now, I have way too many lol

Wire diameter 0.40mm, length 30mm, outer dia 4mm

If you want to try one PM me.
thanks!
Nick

[t. weller]

I’d PM you if I could, I guess I haven’t posted enough. Tim281@icloud.com is my email if you have anymore you’d like to sell.

[AZ_CZ]

Why did you need the higher power spring? Are you using a lower hammer spring?

[retteryer]

I guess improvement doesn’t always mean more power, sometimes it’s a less power.

[MuayThaiJJ]

Yes, lighter spring so that the firing pin hits the rim of the cartridge with more power

[southpaw.parallaxscurioa...]

Yes, lighter spring so that the firing pin hits the rim of the cartridge with more power

Be careful with this because the only thing keeping your firing pin retaining plate from flying off is the butt of the firing pin, which, when the firing pin is struck, is temporarily not in position to retain the plate.

[MuayThaiJJ]

Will do, so far so good!

[AZ_CZ]

Yes, lighter spring so that the firing pin hits the rim of the cartridge with more power

Ok so it’s a lower power spring. Why? Were you having issues? What I’m looking at is would this help with lite strikes when you are running a lower power hammer spring. I’ve never had lite strikes with a 16# hammer spring but have noted increased problems with lite strikes the lower I go.

[MuayThaiJJ]

Read the title again and opening post


Sent from my iPhone using Tapatalk