6mm of take up after reset CGW pro pkg SP01

[Rinconshooter]

I've installed pro pkg on a new CZSp01. The] reset is good and crisp and the trigger pull is smooth. It feels like i would have expected it to but the take up after reset in SA is close to 6mm vs 3
.. the trigger itself moves @3mm before the sear starts to move. What do I have wrong here. I called cajun twice and they don't know. I'm not sure I exactly explained it correctly to them but it just doesn't work for me. Any ideas as to why the trigger moves so far after reset before sesr engagement? I put a gray guns short reset and race hammer in a sig 226 and it feels worlds better.

[Wobbly]

Welcome from Georgia.

Please take a few moments to familiarize yourself with all the sticky posts in the 'New Members' section. Together with the Help Topics in the 'Important Information' or 'FAQ' sub-section, these include 'how tos' such as 'how to' post pictures on the forum.

[IndianaSP-01]

If you want the shortest reset possible, you need to get rid of the Firing Pin Block (FPB) and go Single-Action Only (SAO).  If you did the Pro Package install, you can do this.  You will need some more CGW parts.

[tdogg]

I've installed pro pkg on a new CZSp01. The] reset is good and crisp and the trigger pull is smooth. It feels like i would have expected it to but the take up after reset in SA is close to 6mm vs 3
.. the trigger itself moves @3mm before the sear starts to move. What do I have wrong here. I called cajun twice and they don't know. I'm not sure I exactly explained it correctly to them but it just doesn't work for me. Any ideas as to why the trigger moves so far after reset before sesr engagement? I put a gray guns short reset and race hammer in a sig 226 and it feels worlds better.

Have you adjusted the trigger setscrews properly to minimize pre and post trigger travel?  If you called Cajun and they don't know, then I don't think anyone is going to be able to help you.  I don't recall what disconnector comes with the pro package but you might need to have a custom fitted disconnector to get the trigger pull you are after.  Or you need move on to the shadow lineup of CZ pistols that don't come with a firing pin block.

https://cdn1.cajungunworks.com/wp-content/uploads/2020/07/28155351/How-To-Adjusting-Trigger-Screws.pdf

Cheers,
Toby