Author Topic: What to look for used CZ P-01 Omega  (Read 1710 times)

0 Members and 1 Guest are viewing this topic.

Offline CZ4MESd

  • Newbie
  • *
  • Posts: 2
What to look for used CZ P-01 Omega
« on: December 26, 2023, 11:52:24 AM »
Hi all,

I’m strongly considering buying a used P-01 Omega for $500.

What do you recommend I look for when inspecting it after field
-stripping? How about when test firing?

Thank you in advance!

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5198
Re: What to look for used CZ P-01 Omega
« Reply #1 on: December 26, 2023, 01:01:25 PM »
Just look for unusual wear and damage. I've yet to see one wear out.
« Last Edit: December 27, 2023, 08:15:09 AM by Wobbly »

Offline Whereisit

  • Full Member
  • ***
  • Posts: 211
Re: What to look for used CZ P-01 Omega
« Reply #2 on: December 26, 2023, 02:11:04 PM »
Family Firearms has them for $528 plus $20 to ship. Depending on your ffl fee I'd go new before paying 500 used.

Offline no.vale.la.pena

  • Full Member
  • ***
  • Posts: 146
Re: What to look for used CZ P-01 Omega
« Reply #3 on: December 26, 2023, 03:29:42 PM »
If the safety is installed, make sure you get positive engagement and good resistance on engaging and disengaging.  I found the safety detent plate and spring were parts that needed to be replaced semi regularly on my P01 omegas, especially when I was dry-firing / competing with them a significant amount. Fortunately the part is used on the P07/P09 series (which are not discontinued) and relatively cheap and available so if it is bad it is an easy fix.
Part info for reference:
https://cajungunworks.com/product/97225-p-0709-early-75-manual-safety-plate-spring/

I would go ahead and replace the recoil spring immediately too, for a used gun it is best to start fresh so you can fully track round count on your spring.

I had a rare issue with a piece chipping off the frame of one of my Omegas after a slide stop failure (see post below for pics). CZ ended up warrantying the frame. So I would check that area of the frame, the gun still ran mosly fine but it was easy to miss after first inspection.
Post: https://czfirearms.us/index.php?topic=101942.msg788941#msg788941

Offline Ron IL

  • Jr. Member
  • **
  • Posts: 85
Re: What to look for used CZ P-01 Omega
« Reply #4 on: December 28, 2023, 06:17:58 AM »
If I bought it and put money replacing parts right off I would just pay the little extra and buy the new one.  I got mine used a few months ago for $425.  It had no wear on it at all like it had never been shot.
Ron
KB9TF
Retired Southern IL coalminer

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3303
Re: What to look for used CZ P-01 Omega
« Reply #5 on: December 28, 2023, 09:36:31 AM »
A little late, but I would look for stacking in DA.  I felt one at a show with none and I should have jumped on it.  I bought one from online for less but tha DA was pretty bad.  After a ton of work it’s decent.  As with any CZ, buying in person is a big plus.

Offline SI VIS PACEM PARRABELLUM

  • Hero Member
  • *****
  • Posts: 5865
Re: What to look for used CZ P-01 Omega
« Reply #6 on: December 28, 2023, 12:55:28 PM »
As with any CZ, buying in person is a big plus.
As with any gun new or used buying in person is a big plus. I in fact won't buy anything I can't handle before purchase