P07 trigger problem

[Dallasdave]

Hey guys!  Newbie to the site here. I’ve got a couple of P07s and a P09 and I love them. One of my sevens was purchased used and worn. It shoots accurately but sometimes the trigger can be depressed all the way to the rear without releasing the hammer. It happens while shooting. When at home, if I rack the slide hard I can often get the trigger all the way to the back without dropping the hammer. Usually if I press real hard at that point it will drop. When firing and it happens, you have to rack the slide and eject a round to keep going. What part is likely worn out that would make that happen?  I’ve replaced Glock triggers and some others but I have never monkeyed with the CZs. I plan to disassemble and clean the trigger tomorrow so I wanted to know what to look for and what advice yall had before I do that. Thanks for any help!

[Wobbly]

Hey guys!  Newbie to the site here....

Welcome from Georgia.

Please take a few moments to familiarize yourself with all the sticky posts in the 'New Members' section. Together with the Help Topics in the 'Important Information !' or 'FAQ' sub-section, these include 'how tos' such as 'how to' post pictures on the forum.

[Joe L]

Here are some videos that you might find helpful.  These are for disassembly/reassembly of the P-09/07 pistols.

https://youtube.com/playlist?list=PL7GbOFIiTV0zywDb1XrQ2FMDvFsgCtXkF&si=eSB30wQKHSQqLCSC

Joe L

[larrybobo]

I had an issue similar to this on my p07.  Randomly once per 200 rounds, the trigger would move freely, but the hammer wouldn't drop.  I suspected that the trigger bar was sticking to the frame, thus failing to reset, so I polished the trigger bar where it rubs against the frame.  I also changed the trigger bar spring.  The problem went away.

[Claymore504]

Since you dont know the history on that P07, but it seems it has been shot a lot, I would do a refresh and install all new springs and go from there.

[M1A4ME]

Joined on the 9th of June.  Posted 4 questions on the 9th of June. 

Has not been back since the 9th of June.

Maybe he figured it out on his own?

[Larry F]

Checkif trigger bar spring is in place - turn pistol upside down and pull trigger.  if it works, follow Joe L videos to reset. if not, the trigger bar is probably slipping off the disconnector - talk with CGW guys.

[DannyB]

Any time i have a reliability issue with a self-defense gun I send it to the factory for repair.  I don't remember if CZ does this forever for free like some others, but I will happily pay for the comfort of knowing it is fixed right.