Pre-B firing pin springs

[Indy_Tim]

Does the pre-B CZ 75 use the same firing pin spring that the CZ 75 B uses?  I recently ordered a couple of Wolff spring kits to freshen a couple of new (to me) pistols and the kits say they are for all CZ 75s.  But, the spring is a full size spring (about an inch and a half long) where as the springs I've removed from my pre-B CZ 75s are both short (about 1/2 to 3/4 inch).  I don't recall seeing springs specifically for the early pistols anywhere but then again, was not really looking for them.  I know springs compress with use, but the difference between the two is way more than spring settling would cause.

Thanks,
Tim

[painter]

Your pre b uses a different spring.

They are listed in the calibration paks on the Wolff site.

[Indy_Tim]

Thanks.  I'll order a set this afternoon.

Tim

[bang bang]

the trade in Pre Bs i got had 2 different styles.  a short one and a long one.

pull yours out and see.

[Indy_Tim]

All three of my ('87, '92, '92) have the shorter spring.  For now, I'm going to clean lube and install what they came with until I can order a new set from CZ.