« previous next »
Pages: [1]   Go Down

Author Topic: Witness barrel cracked  (Read 2538 times)

0 Members and 1 Guest are viewing this topic.

Offline slowhatch

  • Newbie
  • *
  • Posts: 4
Witness barrel cracked
« on: December 02, 2012, 10:33:50 PM »
As I was taking my Witness 45 carry comp apart for some cleaning I noticed the barrel was actually chipped at the edge where the bullet chambers. I'm not sure what has caused this. I don't know if the recoil back caused it. I just noticed it but am not sure how long it has been there. It appeared to be very used when I bought it. The recoil spring has been changed several months ago to a 16lb Wolff cut down to almost factory length so it would fit. It has always been very accurate but I've fought jams on the feed ramp going up into the chamber ever since I purchased it. I would have sold it already except its so stinkin accurate.

Any thoughts on what may have caused it? Do you know if Eaa still offers a replacement threaded barrel?

This one measures 4 1/8 and I didn't see anything like that on their website.

I attached pictures to help.



« Last Edit: December 03, 2012, 06:07:50 AM by slowhatch »
Logged

Offline Grendel

  • Administrator
  • Hero Member
  • *****
  • Posts: 8956
  • 'Live Long, and Prosper'
Re: Witness barrel cracked
« Reply #1 on: December 03, 2012, 12:10:05 AM »
Looks like its been dropped.
Logged
Corruptissima re publica plurimae leges - Tacitus

Inter arma enim silent leges - Cicero

I wasn't born in America, but I got here as fast as I could.

Offline kobus

  • Hero Member
  • *****
  • Posts: 1462
Re: Witness barrel cracked
« Reply #2 on: December 03, 2012, 11:32:33 AM »
Quote from: Widge on December 03, 2012, 12:10:05 AM
Looks like its been dropped.

i can't think of any other explanation.
Logged
guns don't kill people. NINJAS kill people.

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8723
Re: Witness barrel cracked
« Reply #3 on: December 04, 2012, 12:57:53 AM »
Call EAA for a Barrel for it.  I believe they still have some Carry Comp Kits in stock and may have a Barrel.
Logged
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline donhuff

  • Newbie
  • *
  • Posts: 10
Re: Witness barrel cracked
« Reply #4 on: December 04, 2012, 06:49:44 PM »
I dont see the chip.
My match barrel is hard chrome plated, maybe it's only the chrome that is chipped.

that top one is an odd looking spring!
Logged

Offline slowhatch

  • Newbie
  • *
  • Posts: 4
Re: Witness barrel cracked
« Reply #5 on: December 04, 2012, 08:35:49 PM »
It is a strange looking spring. I thought it was stock at first but now I'm not so sure.

I'll call Eaa to ck. on the barrel.
Logged

Offline ReloaderFred

  • Hero Member
  • *****
  • Posts: 1239
Re: Witness barrel cracked
« Reply #6 on: December 17, 2012, 10:42:36 PM »
Your chamber mouth could benefit from some light chamfering, which would take care of the jamming/feeding problem you've been having.  All you want to do is break that sharp edge, which doesn't take much to do at all.

Hope this helps.

Fred
Logged
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs

Offline schmeky

  • Hero Member
  • *****
  • Posts: 2897
Re: Witness barrel cracked
« Reply #7 on: December 17, 2012, 10:57:42 PM »
ReloaderFred,

Is 100% on the money.  I have had to "throat" every Witness pistol in 45ACP I have owned to get it to feed properly.  The chamber throat from the factory is essentially unfinished, being left with sharp corners that virtually guarantee feeding issues.
Logged

Offline ReloaderFred

  • Hero Member
  • *****
  • Posts: 1239
Re: Witness barrel cracked
« Reply #8 on: December 18, 2012, 12:52:32 PM »
I think it depends on which worker did the barrel, since I've gotten some that were done right, and others that weren't.  It only takes a couple of minutes to dress up the chamber mouth and ramp.  It sure saves a bunch of aggrevation and is a quick fix.

Hope this helps.

Fred
Logged
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs

Offline slowhatch

  • Newbie
  • *
  • Posts: 4
Re: Witness barrel cracked
« Reply #9 on: December 19, 2012, 04:19:03 PM »
I got around to calling Eaa. The comp carry barrel isn't available anymore. I guess I'll just shoot it as is.

On another note I've smoothed the chamber edges out. I can rack every round by hand and it feeds fine so I think that has taken care of the feed issue. Thanks for the advice.
Logged

Offline ReloaderFred

  • Hero Member
  • *****
  • Posts: 1239
Re: Witness barrel cracked
« Reply #10 on: December 19, 2012, 08:38:41 PM »
You're welcome.  About half of my Witnesses have had to have this done to make them reliable.  It's really a quick fix, and can be done by just about anyone, but there are a very few people who shouldn't attempt it.  It's those who usually bleed when they get near a screwdriver or other tool.............

Fred
Logged
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs
Pages: [1]   Go Up
« previous next »