I polished the feed ramp with some 400 grit sant paper wrapped around a dowel, and then with a felt bob and polishing compound.
Here's some other mods I'm thinking about
1.Polish the trigger transfer bar and bearing surfaces on the frame and side plate
2.install overtravel screw
3.Polish bearing surfaces on hammer
4.Contour trigger for comfort
5.Install Harringtons #2 firing pin
6.Have my smithy install a set of adjustable sights
7.Wolf 10% magsprings
8.OD green Gunkote and a pair of checkered walnut grips
Ninja
