Author Topic: Witness - with .22LR upper  (Read 1306 times)

0 Members and 1 Guest are viewing this topic.

Offline win308

  • Full Member
  • ***
  • Posts: 265
Witness - with .22LR upper
« on: February 28, 2014, 01:36:24 PM »
I just purchased a 22/45 combo the other day.  The .45 shoots like a dream....perfectly zeroed left and right and up and down.  My only wish would be for a day-glo front sight option.....my old eyes have to really focus to get the sight picture right on.

When I changed out for the .22 upper I shot 1 round and then a jam.  My mistake....I was using Remington Golden bullet from a bulk pack.  Even though the slide is aluminum, that's a lot of mass for a .22 to cycle.  Next trip to the range, I used some Aguila super power .22 ammo...1280 fps advertised.  Now we are talking!!  Gun cycled, functioned, fed and ejected every round.  After 100 rds of Aguila I once more tried Remington.   Now the Golden Bullet is running fine too.  I guess the gun needs to wear in a bit before perfect functioning is achieved.  My Ruger 22/45 Mark III shoots slightly tighter groups, but accuracy was OK for the Tanfoglio.   The slide never locked open after the last shot no matter what ammo was used, but I'll work on that later.  I'm happy with my purchase.

Offline muggia59

  • Hero Member
  • *****
  • Posts: 1428
Re: Witness - with .22LR upper
« Reply #1 on: February 28, 2014, 03:55:34 PM »
Nice buy. Been looking at those over the years. I see they are on Grabagun. Nice price for a dual capability gun.
CZ SP01 Tactical, CZ SP01 Phantom, CZ P07, CZP01, CZCadet kit, CZ Scorpion EVO S1.

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8732
Re: Witness - with .22LR upper
« Reply #2 on: March 01, 2014, 02:13:28 AM »
Congratulations on your new .22/.45 Witness kit and Welcome to the Clone Side of czfirearms!  8)  :)
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline ReloaderFred

  • Hero Member
  • *****
  • Posts: 1239
Re: Witness - with .22LR upper
« Reply #3 on: March 01, 2014, 11:56:42 AM »
When you seat the magazine into the magazine well, be sure to depress the magazine release as you do so.  If you don't, it will eventually elongate the slot in the magazine and it won't lock into place.

Hope this helps.

Fred
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs