« previous next »
Pages: [1]   Go Down

Author Topic: CZ 75 pre B firing pin spring lengths  (Read 2180 times)

0 Members and 1 Guest are viewing this topic.

Offline Blackwatch

  • Hero Member
  • *****
  • Posts: 1506
CZ 75 pre B firing pin spring lengths
« on: December 28, 2014, 03:03:50 PM »
Seeking knowledge from CZ gurus...

I ordered hammer and recoil springs (came with firing pin spring also) from Wolff for my '83 & '91. I changed out the '83 without issue however, when it came to the '91, the firing pin spring provided by Wolff was almost 3x the length of the one that came out (35 coils Vs 10).
I looked on CZ Custom and their firing ping spring for 75's is approx 10 coils.

I'd welcome any insights as to why the longer the spring fits the '83 and '91 requires a shorter spring? Thanks!
Logged

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8603
Re: CZ 75 pre B firing pin spring lengths
« Reply #1 on: December 28, 2014, 07:26:29 PM »
Different firing pin shape.
The shoulder on the older pin is further back if I recall.

Can you post a photo of yours?
Logged

Offline Blackwatch

  • Hero Member
  • *****
  • Posts: 1506
Re: CZ 75 pre B firing pin spring lengths
« Reply #2 on: December 28, 2014, 09:47:57 PM »
Quote from: Stuart on December 28, 2014, 07:26:29 PM
Different firing pin shape.
The shoulder on the older pin is further back if I recall.

Can you post a photo of yours?

Stuart, your recollection is impeccable!! Thank you! I had worked on them separately and didn't pay attention to the pin configuration but as soon as I took them out for a photo, the shoulder difference was apparent.

Picture included for reference...'83 is on the left. New spring for the '91 ordered from CZ Custom today!

Logged
Pages: [1]   Go Up
« previous next »