« previous next »
Pages: [1]   Go Down

Author Topic: Clean it first!  (Read 5943 times)

0 Members and 1 Guest are viewing this topic.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19900
Clean it first!
« on: February 12, 2015, 01:26:08 PM »
The last thing you should do is clean your new gun before you test fire it, right? I looked at the Scorpion and figured, well, this is a big piece of machinery, probably gonna be a chore...*sigh*, let's get started.

Then I read the instructions. Bolt back, charging handle locked to rear. Push pin out, pull trigger unit back and up.



OK, so NOW comes the hard part, right?

Reach in, push bolt back with thumb, lift out.



Ok, NOW comes the hard...I'm done? That's IT?

That's it.



Clean and reassemble. I did need to use the longer rifle rod to run a patch through the bore, now I know why they threw in a Bore Snake!  I think this thing is easier to clean than anything else I own!
One small issue - I dropped the bolt on the carpet while cleaning it...and cat hair got on it. Tried to get it all off, but I'll bet the first few rounds smell like burnt cat hair... :o
Logged

Offline AZ_CZ

  • Hero Member
  • *****
  • Posts: 3292
Re: Clean it first!
« Reply #1 on: February 12, 2015, 02:07:04 PM »
Which part is serialized, upper or lower or did they do both? Be sweet if they make it just the lower trigger group. Be easy to sell uppers in different configurations or calibers since you are not selling  a serialized gun.
Logged
CZ Fanbot since 1996

Offline Charlie-2-6

  • Jr. Member
  • **
  • Posts: 64
Re: Clean it first!
« Reply #2 on: February 12, 2015, 02:35:46 PM »
Upper is serialized. Lower is basically just a triggergroup/housing, cfr the M1 carbine
« Last Edit: February 12, 2015, 02:39:24 PM by Charlie-2-6 »
Logged

Offline stuffgeek

  • Full Member
  • ***
  • Posts: 126
Re: Clean it first!
« Reply #3 on: February 12, 2015, 10:08:31 PM »
Nice to see some guns are designed with common sense!
Logged

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
Re: Clean it first!
« Reply #4 on: February 12, 2015, 10:11:36 PM »
"Ok, NOW comes the hard...I'm done? That's IT?" eheheh. Nice.
Logged
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Greankrayon

  • Full Member
  • ***
  • Posts: 310
Re: Clean it first!
« Reply #5 on: February 13, 2015, 01:59:41 PM »
Heard rumors of no factory Cz stock... Sad day indeed.
Logged

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19900
Re: Clean it first!
« Reply #6 on: February 13, 2015, 09:31:35 PM »
Talked to CZ-USA today, still waiting for ATFE response, and they haven't sold any factory Scorpion stocks. Only stocks out there are modified airsoft or what was sold on select fire versions. I am trying the single point sling for now, or will be next range trip.

Logged

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
Re: Clean it first!
« Reply #7 on: February 13, 2015, 09:33:19 PM »
Nice pic. ^^ 8)
Logged
Will work for CZ pics! (including but not limited to all CZ clones)

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19900
Re: Clean it first!
« Reply #8 on: February 13, 2015, 09:47:39 PM »
I am guessing that's how it's supposed to work - not a whole lot of people down here to see face to face.
Logged

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
Re: Clean it first!
« Reply #9 on: February 13, 2015, 10:00:02 PM »
Quote from: armoredman on February 13, 2015, 09:47:39 PM
I am guessing that's how it's supposed to work - not a whole lot of people down here to see face to face.

I have found slings in general to be confusing having never run one my self. I believe this is how they are generally used, with but stocks at least. This way if someone grabs your weapon they do not ring your neck as easily. It also allows better positioning is one needed to obscure one at their side under a coat.



Scorpion EVO Bonus pic. That is her don't mess with me face.  ;D


« Last Edit: February 13, 2015, 10:05:49 PM by Tok36 »
Logged
Will work for CZ pics! (including but not limited to all CZ clones)
Pages: [1]   Go Up
« previous next »