What else do I need for my PCR?

[Stopsign32v]

Well I've currently got it down to bare frame except for the hammer and mag release. I plan to polish all of the contact surfaces and so far these are the only parts I have:

SRS-1 https://cajungunworks.com/product/srs-1-short-reset-system/

INST-DC Decocker Installation Kit https://cajungunworks.com/product/inst-dc-dcer-install-kit/

Not even sure what the Decocker install kit is for. I was able to take down the whole gun with my regular punches.

What else short of a race hammer?

Edit: For now I will be using a SP01 smooth trigger.

[SmCaudata]

I have a safety model, but from what I can tell, the srs changes the firing pin lifter to improve pull. Without changing a disconnector, the static position of trigger on reset will be the same. You could add the RRK-2 to improve this. Again, I'm more familiar with the safety models. You could call CGW David is good at answering questions.

The decocker install kit is just a nice punch and a correctly sized slave pin to make things easier.

Sent from my SM-G935T using Tapatalk

[Stopsign32v]

Anyone else?

[Peacetilence]

Well I've currently got it down to bare frame except for the hammer and mag release. I plan to polish all of the contact surfaces and so far these are the only parts I have:

SRS-1 https://cajungunworks.com/product/srs-1-short-reset-system/

I installed that kit into my Cold War 75B since I wanted to keep the spur hammer. Happy as a clam

INST-DC Decocker Installation Kit https://cajungunworks.com/product/inst-dc-dcer-install-kit/

Not even sure what the Decocker install kit is for. I was able to take down the whole gun with my regular punches.

The starter punch is meant to get he trigger pin and the hammer pins out. If you haven't taken the hammer pins out yet -- don't unless you're going to swap the hammer. The slave pin makes putting the sear cage back in a lot easier, highly recommended:

https://cajungunworks.com/product/s-pin/

What else short of a race hammer?

Edit: For now I will be using a SP01 smooth trigger.

I like the old style trigger best, have it in my PCR and 97BD:

https://cajungunworks.com/product/75585-85c-old-style-trigger/

Definitely get a floating trigger pin and reduced power trigger spring, have both in my 75B as well:

https://cajungunworks.com/product/tr-pin-cgws-exclusive-floating-trigger-pin/
https://cajungunworks.com/product/rp-trs-reduced-power-trigger-return-spring/

Edit: Forgot -- also get at least one of these: https://cajungunworks.com/product/15-lifter-spring/ , in case the original gets lost or broken during reassembly...