Author Topic: cz model 27 in 380  (Read 3258 times)

0 Members and 1 Guest are viewing this topic.

Offline cityofoz

  • Newbie
  • *
  • Posts: 2
cz model 27 in 380
« on: June 10, 2018, 04:24:28 PM »
I am trying to definitely ID a cz model 27 in my possession.   On the top of the slide is CESKA  ZBROJOVKA ASv PRAZE  109812
SERIAL # ON BARREL  109812
On left side frame cz symbol   then serial # 109812
on left side of slide  near rear stamp T  then cz  30
on right side of frame   left to right  cz  J  standing lion (I think)  31
I have watched video of disassembly which indicates that you  must rotate barrel 180 degrees to remove from slide
but not in my case.   Locking piece that rides on top of barrel does not have multiple grooves but has one diagonal groove that engages lug on the barrel
I have checked barrel to make sure it is 380.
any comments or info.  Grip is made of dark wood and appears to be original.

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: cz model 27 in 380
« Reply #1 on: June 10, 2018, 05:55:30 PM »
Does it say "Pistole Modell 27" on the left hand side of the slide? 
The 27 is chambered in 7.65mm (.32 ACP).

The diagonal grove and it being in .380 sounds like you have a CZ 24.

The T cz 30 means that it was in a Signal Battalion.  The 30 either being the year or the number of the weapon--most likely the year
The J 31 means that it was in a Cavalry regiment and possibly the next year 1931.

CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline cityofoz

  • Newbie
  • *
  • Posts: 2
Re: cz model 27 in 380
« Reply #2 on: June 10, 2018, 06:02:57 PM »
No Pistole modell 27 anywhere

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: cz model 27 in 380
« Reply #3 on: June 10, 2018, 06:05:40 PM »
No Pistole modell 27 anywhere

Then you, sir, are the proud owner of a CZ 24!
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline eastman

  • Hero Member
  • *****
  • Posts: 3799
Re: cz model 27 in 380
« Reply #4 on: June 10, 2018, 07:55:14 PM »
No Pistole modell 27 anywhere

Then you, sir, are the proud owner of a CZ 24!

That is a lot like the story with my vz24 - shop said it was a .32 (and called it a model 31), but it didn't disassemble the "right" way and a .32ACP/7.65 Browning snap cap falls too deep into the chamber.
I don't look like my avatar!

Offline shaneb1

  • Jr. Member
  • **
  • Posts: 87
Re: cz model 27 in 380
« Reply #5 on: September 02, 2018, 03:08:06 PM »
most likely you have a cz 24. However, there were very few cz 27's in .380. I had magazines for them, but never have seen one for sale. If you do have one of the few cz 27, it is worth quite a bit.