Author Topic: CGW P07 Pro Package Single Action Trigger Break  (Read 1372 times)

0 Members and 1 Guest are viewing this topic.

Offline jtj5002

  • Jr. Member
  • **
  • Posts: 27
CGW P07 Pro Package Single Action Trigger Break
« on: September 17, 2018, 11:21:40 AM »
I recently installed the pro package with the .225 roller. Currently single action is breaking at the very back of the trigger pull with almost zero over travel. Sometimes the trigger will actually hit the frame, and the trigger flexing is what actually releases the hammer. While having zero over travel is nice, I am worried about the consistency of trigger breaks. Will the larger .230 roller move single action break slightly forward without affecting double action too much? Double action currently releases the hammer at about 3/4th of full hammer travel and sets off all primers up to CCI primers, and has about 2-5% light strikes on wolf primers using 18 lb hammer spring.

Factory roller is .224 and breaks almost exactly like CGW .225

Thank you!
« Last Edit: September 17, 2018, 11:26:51 AM by jtj5002 »