Detail stripping a PCR

[nettle]

Does anyone have a link to a good video or book that could help me through the detail stripping a PCR?

[anonymouscuban]

Does anyone have a link to a good video or book that could help me through the detail stripping a PCR?

Check the stickied threads in the Gunsmith sub forum. There are posts with photos that cover how to detail strip a decocker.

I actually just brought home a PCR about 5 minutes ago. I will be detail stripping tomorrow to do some polishing and install some CGW parts.

The hardest part is removing the sear assembly. You have to make sure you remove the pin right to left. And take care or you'll lose the tiny springs inside.

Sent from my SM-G930F using Tapatalk

[anonymouscuban]

Here is one:

https://r.tapatalk.com/shareLink?url=https%3A%2F%2Fczfirearms%2Eus%2Findex%2Ephp%3Ftopic%3D14688%2E0&share_tid=14688&share_fid=23595&share_type=t

Sent from my SM-G930F using Tapatalk

[Tok36]

Here are some of the better guides i have found. CZ75 Variant decockers are generally all the same inside. The alloy frames models and the RAMI use a Fixing insert (steel disk) for the left side sear cage pin stop. In the steel frames the sear cage pin goes through both side of the frame. So the guides can be used interchangeably for the most part.

Ongoing review - CZ 75 SP-01 Tactical
https://www.ncgunowners.com/forum/showthread.php?tid=42855&page=2

Disassembly and polishing CZ SP01 Tactical or phantom / cz 75BD / P01 *PIC HEAVY*
http://www.calguns.net/calgunforum/showthread.php?p=7564021&posted=1


BEST SP-01 Tactical CGW Modifications Tutorial Videos
https://czfirearms.us/index.php?topic=70584.0;topicseen


Cajunizing and Smoothing a CZ Rami BD (tdogg's videos)
https://czfirearms.us/index.php?topic=62123.0

CGW PRO upgrade project for P-01 (Pic heavy)
https://czfirearms.us/index.php?topic=68279.0

[BCC]

check out YouTube Channel ABYSS1232 ...offers some really good disassembly vids.
Take your time and research plenty before you begin....you'll be very rewarded in the end.

[ZedHeadHunter]

I bought the armorers manual, it has lots of detailed pictures.

https://shop.cz-usa.com/ProductDetail/19624_Cz-75-Series-Pistols-W-Decocker-Armorers-Manual

Lots of other forum posts and videos out there that are helpful.

[nettle]

Thanks everyone for these links!

[anonymouscuban]

Thanks everyone for these links!

Watch the little lifter spring in the sear. I've now either lost it or broke it every time I've disassembled the sear on my decocker models. Just broke one today on my PCR.

Sent from my SM-G930F using Tapatalk

[john seeley]

Here's some videos I had bookmarked but none are specific the the PCR. I hope you get something out of them.

https://www.youtube.com/watch?v=XYcbzoKXtD4
https://www.youtube.com/watch?v=eTMb5NgDYyo
https://www.youtube.com/watch?v=zADoZTDBpvk
https://www.youtube.com/watch?v=xlqkpeCI024
https://www.youtube.com/watch?v=v9l8tEdWj1Q
https://www.youtube.com/watch?v=yeqXeywxcos

[IDescribe]

Word of warning:

If you pull the trigger (probably no need) the spring can shoot out.  The first time I did it, it hit me just below the eye, hard enough to draw blood.  I was not wearing safety glasses, and it could have been MUCH worse.  Do not be like me.  Wear safety glasses. 

[jabski]

Watch the videos that were suggested, they?re very helpful.
There?s something so satisfying about being able to do your own improvements and having it turn out well. 
Enjoy, and yes, wear safety glasses.

[nettle]

IDescribe, this is excellent! I got some cold indoor winter months coming up and a second PCR due to be delivered next week. The PCR is my favorite carry. When I get the second one for backup I will be using these links and video's all have shared with me here.