FDE CZ P10C w/ Night Sights - $389 at CDNN

[RSR]

the ones sold by CDNN are most likely the remaining imported P-10c pistols that were sitting at a distributor (since the new ones will be a new SKU, they closeout the old ones)

Good info.  They have, or did have, black ones too for $10 less earlier in the week.

[Goju]

So the 3 O?clock notch being present on the back plate is not indicative all the updates being current, because the pistol in the video does not have that visual feature (looked twice, sorry if I missed it)? Or, the subject pistol is not the latest iteration?

[Earl Keese]

3:00 notch indicates the latest revision.

[Goju]

Thanks Earl. I guess my point being that the subject pistol in the posted video is not the most current iteration  (a dated video, not an example of the most current version of that model, or both)

[seebee62]

Just got my P10 C FDE today and it has the 3 o?clock notch.


Sent from my iPhone using Tapatalk Pro

[YoungGun]

Just got my P10 C FDE today and it has the 3 o?clock notch.


Sent from my iPhone using Tapatalk Pro

Same here. Picked it up yesterday.

Yg

[twowheels]

Ordered one today from CDNN.  I couldn't resist.

[Bricktop]

I received my FDE P10C from CDNN yesterday; SKU is 91521, it has the 3-o'clock notch, and the test "target" shows an 8-22-18 test date.

[seebee62]

I received my FDE P10C from CDNN yesterday; SKU is 91521, it has the 3-o'clock notch, and the test "target" shows an 8-22-18 test date.

Same SKU as mine. Test date 8-28-18


Sent from my iPhone using Tapatalk Pro

[Bricktop]

I received my FDE P10C from CDNN yesterday; SKU is 91521, it has the 3-o'clock notch, and the test "target" shows an 8-22-18 test date.

Same SKU as mine. Test date 8-28-18

Groovy.

[CzechEm]

Just got my P10 C FDE today and it has the 3 o?clock notch.


Sent from my iPhone using Tapatalk Pro

Thanks for the update. Hopefully some of the other vendors are now out of the older rev guns as well. I know many local shops can have inventory sitting for a long time so that might be a bad place to try to buy one of these.

[twowheels]

Just received mine, test target 8/28/18 as well.  It looks and feels nice and the sights seem good.  But, I was expecting more from the out of the box trigger.  Its breaking at 7 lbs and is creepy, gronchy, and actually feels worse than the triggers on my glock 42, my m and p compact with apex stuff, my shield with apex stuff, and the VP 9 I sold to a friend.  It is quite disappointing.  I'm going to take it to the range and insure functionality and then I will install the CGW trigger and striker I have coming in and think about installing other striker springs and polishing to see what kind of a trigger pull I can get out of it.   

[twowheels]

I shot it today.  It feels very good in the hand and points beautifully.  I couldn't help myself and did a detail strip and installed a CGW trigger and striker and a couple springs, and some polishing, before taking it out.  The pin that held the trigger to the trigger bar was walking out as delivered from the factory so I corrected that issue before shooting it.  I got the trigger down to about 5 and 1/4 pounds before hitting the range.  I like the way it shoots and feels.  But, I also took my P01 omega with full CGW kit and I shoot the metal gun better.  I'll keep working with the p10 but I really think I will never like striker fired polymer guns as much as metal framed hammer equipped guns, but time will tell. The triggers are better and the recoil impulses are different and more favorable to me on the metal framed hammer equipped guns.

I let go most of the other striker fired guns I've ever owned including springfield xdm, and H and K vp9.  However, I think I'll probably keep the p10.  I do plan to try some glock striker springs and I can think of a few more places to polish; I'm hoping to further smooth the trigger and drop another 3/4-1lbs on the pull weight.   

[CzechEm]

I've got one coming in next week 

Plan is to just run several hundred rounds through it and see how the trigger feels afterwards.
Maybe some polishing if it needs it, but for now I just plan on swapping to a stainless guide rod.

[AZ_CZ]

Checked mine, 8/28/18.