Author Topic: CZ P10c Breech Face Wear/Erosion  (Read 272 times)

0 Members and 1 Guest are viewing this topic.

Offline stevewonderful

  • Newbie
  • *
  • Posts: 2
CZ P10c Breech Face Wear/Erosion
« on: February 10, 2019, 09:56:48 PM »
I recently picked up a P10c in trade. Looked to be in very good shape. When I got home I field stripped it and began to clean it. Thats when I found this anomaly on the breech face. I don't know what it is or if its even safe to use. Anybody have any idea's? I'll probably contact CZ this week to see what they say. I'm new to CZ so I could use some advice please. Thanks.

https://drive.google.com/drive/folders/1R70-0YD8NwLKSPwSZdmG9NbS_H1lXeCk

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4154
Re: CZ P10c Breech Face Wear/Erosion
« Reply #1 on: February 10, 2019, 10:24:56 PM »
Looks a bit like the cut out in the breech face of a 75 and P Series variant slide. In a 75/P Series i assume that it is there to assist cartridge feeding. I do not have a P-10 handy to compare. Hopefully another forum member with a P-10 or more solid information will chime in to confirm or correct me.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline seebee62

  • Jr. Member
  • **
  • Posts: 95
CZ P10c Breech Face Wear/Erosion
« Reply #2 on: February 10, 2019, 10:55:22 PM »
I recently picked up a P10c in trade. Looked to be in very good shape. When I got home I field stripped it and began to clean it. Thats when I found this anomaly on the breech face. I don't know what it is or if its even safe to use. Anybody have any idea's? I'll probably contact CZ this week to see what they say. I'm new to CZ so I could use some advice please. Thanks.

https://drive.google.com/drive/folders/1R70-0YD8NwLKSPwSZdmG9NbS_H1lXeCk

I have the same thing on my P10C FDE 2018 test fired. I have approximately 250 rounds through zero malfunctions.
I think my P07 has it also. 


Sent from my iPhone using Tapatalk Pro

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 18253
Re: CZ P10c Breech Face Wear/Erosion
« Reply #3 on: February 11, 2019, 01:01:14 AM »
Is it 1st generation, Transitional or 2nd Gen?

I took some photo I will process quickly.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 18253
Re: CZ P10c Breech Face Wear/Erosion
« Reply #4 on: February 11, 2019, 01:17:35 AM »
Well, out of a whole bunch of pictures taken very awkwardly, only one came out remotely clear enough.  This is the breechface of my P-10C 1st gen, which has several thousand rounds through it. At first glance it looked like yours, but it hasn't been cleaned in several hundred rounds. A few passes with the GI toothbrush and Weapon Shield gave me this;

 

I think what you have is the normal cut out with an accretion of carbon buildup. Scrub that puppy clean, but even filthy, it won't affect your pistol.

Offline dwhitehorne

  • Full Member
  • ***
  • Posts: 315
Re: CZ P10c Breech Face Wear/Erosion
« Reply #5 on: February 11, 2019, 03:29:47 AM »
It looks to me like carbon build up.  Try taking a dental pick or the tip of your pocket knife and scrape it clean. David

Offline @mindset_1st

  • Newbie
  • *
  • Posts: 14
Re: CZ P10c Breech Face Wear/Erosion
« Reply #6 on: February 11, 2019, 05:38:49 AM »
Looks like you might have a serious issue there..... just joking, go shoot the crap out of it.

Offline stevewonderful

  • Newbie
  • *
  • Posts: 2
Re: CZ P10c Breech Face Wear/Erosion
« Reply #7 on: February 11, 2019, 02:16:07 PM »
Thanks all!!

 

anything