Author Topic: SA Safety compatibility  (Read 178 times)

0 Members and 1 Guest are viewing this topic.

Offline katsu

  • Full Member
  • ***
  • Posts: 107
SA Safety compatibility
« on: February 11, 2019, 04:42:18 PM »
I noticed the SA has a different style of safety to the SP-01, using a tumbler system. I don't have an SP-01 any longer to compare, and I need a lower profile safety for my holster. Anyone know if they and/or the 85c are intercompatible?

The fleet:
CZ 75 P-01
S&W 586 No Dash
S&W/Aero AR-15
Remington 870 Wingmaster
M1 Garand

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4157
Re: SA Safety compatibility
« Reply #1 on: February 11, 2019, 05:47:26 PM »
What model CZ are you talking about? There are standard and paddle safetys available for both the D style and spindle style safety designs.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline katsu

  • Full Member
  • ***
  • Posts: 107
Re: SA Safety compatibility
« Reply #2 on: February 11, 2019, 05:50:57 PM »
Sorry, I have the 2018 75b SA, and would like to find a compatible ambi safety for it in a lower profile. I figured the SP-01 and 85c both had ambi safeties, but I don't know if the different designs of the safeties render them incompatible with the different frames.
The fleet:
CZ 75 P-01
S&W 586 No Dash
S&W/Aero AR-15
Remington 870 Wingmaster
M1 Garand

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4157
Re: SA Safety compatibility
« Reply #3 on: February 11, 2019, 07:05:28 PM »
For the CZ75 SA you can use the safety levers linked below. The SP-01, SP-01 Shadow use D style. The 85c, 85B, 75SA use tumbler style.

CZ 85 C Safety Tumbler RHS
https://czcustom.com/cz-parts-all/safeties.html

CZ 85 Combat Thumbler LHS
https://czcustom.com/cz-parts-all/safeties/cz-85-c-safety-thumbler-lhs.html
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Model Citizen

  • Newbie
  • *
  • Posts: 16
Re: SA Safety compatibility
« Reply #4 on: February 11, 2019, 07:28:51 PM »
Don’t know if this’ll help, but there’s a fellow on this site that makes & sells R/H safety deletes for the 75SA. I think they were so a R/H laser grip could be installed.
Can’t remember his name but it was well made & worked fine.
« Last Edit: February 11, 2019, 08:25:52 PM by Model Citizen »

Offline katsu

  • Full Member
  • ***
  • Posts: 107
Re: SA Safety compatibility
« Reply #5 on: February 11, 2019, 07:46:20 PM »
Thanks! Glad I asked, because I was going to buy the D style, since it looked like the sear cages were the same.
The fleet:
CZ 75 P-01
S&W 586 No Dash
S&W/Aero AR-15
Remington 870 Wingmaster
M1 Garand

Offline redlightrich

  • Full Member
  • ***
  • Posts: 174
Re: SA Safety compatibility
« Reply #6 on: February 17, 2019, 09:41:46 AM »
Hello Katsu, Tok is correct, and thanks for providing the link Tok..

Also, if it makes a difference to you, the Stainless 75B ( later one with big beaver tail) come with a lower profile, tumbler type ambi safety, which seems to be identical to the 85C except it is in stainless. Not cheap either.
They aren't super low profile, but they won't create an issue for holstering like the paddle type may.

When I get some free time, I am going to make a block off for the right side ( I know someone here did that already).

Good Luck!!

Rich

 

anything