« previous next »
Pages: [1]   Go Down

Author Topic: CZ-75 grip screws coming loose  (Read 1508 times)

0 Members and 1 Guest are viewing this topic.

Offline Metal Wonder Nine Guy

  • Sr. Member
  • ****
  • Posts: 541
CZ-75 grip screws coming loose
« on: June 03, 2019, 11:50:09 AM »
So a buddy and I met up Friday at the range, and we shot my 75B. I had taken the Hogue grips off that morning and put on my regular VZ grips, and made sure I tightened the screws down. My buddy shot the first mag through the gun that night and he said that afterwards the screws had loosened up. As he is a fellow CZ fan and owner, he had a similar occurence happen when he got his SP-01. To counter the problem, he ended up putting lock tight onto the screws to keep them from coming loose.

So have any of you folks had similar issues with CZ grip screws and what did you do?
Logged

Offline DWARREN

  • Sr. Member
  • ****
  • Posts: 626
  • Old & Tired
Re: CZ-75 grip screws coming loose
« Reply #1 on: June 03, 2019, 12:31:57 PM »
A very small drop of blue Loctite.
Do not use very much or they may never come off again.
Logged
"1776" - Part II

Offline SoCal

  • Sr. Member
  • ****
  • Posts: 596
Re: CZ-75 grip screws coming loose
« Reply #2 on: June 03, 2019, 12:41:27 PM »
All of my CZ's came with star washers under the grip screws which keeps them from loosing.
Logged
If I had known how much better being retired is than working I would have done it FIRST.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
Re: CZ-75 grip screws coming loose
« Reply #3 on: June 03, 2019, 01:18:43 PM »
I suggest trying out small rubber o rings on the grip screws. Locktight is an option but it comes with some potential issues depending on how it is applied and what it is applied to. I am sure it has worked out fine for many however i have seen a few CZ owners get them selves into trouble in part because they were unfamiliar with using locktight.
« Last Edit: June 09, 2019, 12:13:33 PM by Tok36 »
Logged
Will work for CZ pics! (including but not limited to all CZ clones)

Offline larryflew

  • Hero Member
  • *****
  • Posts: 3421
  • Minnesota
Re: CZ-75 grip screws coming loose
« Reply #4 on: June 03, 2019, 02:02:11 PM »
Either suggestion works great, just grip screws not so much.
Logged
When did it change from "We the people" to "screw the people"?

, []]]]]]]]]]]\>
        )'_\   (
'            \ *\
'              \ _\


Larry

Minnesota shooter
and CZ fanatic
NRA life since the 70's
USAF 66-70

Why use 911 when it's faster to use 1911 or 9mm?

Offline Metal Wonder Nine Guy

  • Sr. Member
  • ****
  • Posts: 541
Re: CZ-75 grip screws coming loose
« Reply #5 on: June 03, 2019, 02:58:02 PM »
Quote from: Tok36 on June 03, 2019, 01:18:43 PM
I suggest trying out small rubber o rings on the grip screws. Locktight is an option but it comes with some potential issues depending on how it is applied and what it is applied to.

What size O rings do.you use then?
Logged

Offline Metal Wonder Nine Guy

  • Sr. Member
  • ****
  • Posts: 541
Re: CZ-75 grip screws coming loose
« Reply #6 on: June 03, 2019, 02:58:41 PM »
Quote from: SoCal on June 03, 2019, 12:41:27 PM
All of my CZ's came with star washers under the grip screws which keeps them from loosing.

Was there a specific set of star washers that you used?
Logged

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
Re: CZ-75 grip screws coming loose
« Reply #7 on: June 03, 2019, 03:11:41 PM »
Due to differences in grips it may depend to some degree what grips you are working with but i will bet that something around this size will work (linked below). In the past i have just taken the grip and grip scerw to the hardware store so that i could size them on the spot.

LOK O-Rings 1/8 ID x 1/4 OD
https://lokgrips.com/accessories/o-rings-CZ75/



« Last Edit: June 03, 2019, 03:16:15 PM by Tok36 »
Logged
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Rmach

  • Hero Member
  • *****
  • Posts: 1526
Re: CZ-75 grip screws coming loose
« Reply #8 on: June 03, 2019, 04:07:05 PM »
Purple Loctite (222) is what you should use for grip screws.
Logged

Offline Blackwatch

  • Hero Member
  • *****
  • Posts: 1504
Re: CZ-75 grip screws coming loose
« Reply #9 on: June 03, 2019, 04:57:26 PM »
Haven't encountered issues with factory screws...after market, well, that's another story  ::)
Logged

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3223
Re: CZ-75 grip screws coming loose
« Reply #10 on: June 03, 2019, 07:42:20 PM »
Take a look at Lok screws with rubber washers.
Logged

Offline Oleman

  • Jr. Member
  • **
  • Posts: 82
Re: CZ-75 grip screws coming loose
« Reply #11 on: June 09, 2019, 11:57:11 AM »
I had same problem, clean holes and screws prior to applying Loctite and they will stay tight.



Logged
Pages: [1]   Go Up
« previous next »
 

anything