Author Topic: Short reach trigger and SAO?  (Read 229 times)

0 Members and 1 Guest are viewing this topic.

Offline czgunner

  • Full Member
  • ***
  • Posts: 112
Short reach trigger and SAO?
« on: April 10, 2019, 08:35:22 PM »
Is this something I can put together?
I’ve got small hands and am trying to figure out the way to make a CZ work.
Disabled combat veteran

Offline George16

  • Full Member
  • ***
  • Posts: 433
Re: Short reach trigger and SAO?
« Reply #1 on: April 10, 2019, 08:44:14 PM »
I don’t think so. The RRK uses a custom disconnector in addition to a trigger drilled for a pretravel and over travel screw.

Just install a SAO trigger and adjust the pretravel screw.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 3197
Re: Short reach trigger and SAO?
« Reply #2 on: April 10, 2019, 11:05:01 PM »
Flat SAO trigger is the shortest reach you can get.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 4282
Re: Short reach trigger and SAO?
« Reply #3 on: April 11, 2019, 01:26:57 AM »
I thought the same thing as Earl Keese until i saw this one. This is the only short reach SAO trigger i have seen, should work for the 75 variants and TS. Minor fitting may be required in some cases.

CZ SAO Trigger - Short Reach
https://www.armorycraft.com/product-page/cz-sao-trigger-short-reach-blue
« Last Edit: April 11, 2019, 02:28:08 AM by Tok36 »
Will work for CZ pics! (including but not limited to all CZ clones)

Offline adrian

  • Sr. Member
  • ****
  • Posts: 764
Re: Short reach trigger and SAO?
« Reply #4 on: April 11, 2019, 02:20:51 AM »
    Hiya cz gunner and thx for your thread. Seeing operators chime in was already a lesson for me,with those new fangled SR design. How have you adapted your other platforms and is this SAO just planned for one platform? I didn't have good luck taking DA/SA and converting to SAO,so hope thats not the project. Be well.

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 4609
  • I've shot the rest, I now own the best - CZ
Re: Short reach trigger and SAO?
« Reply #5 on: April 11, 2019, 06:07:57 AM »
Just for a visual reference, one of my Compacts converted to SAO with a straight trigger.  It's cocked/locked, so the trigger is where it would be when you fire it.

Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 3197
Re: Short reach trigger and SAO?
« Reply #6 on: April 11, 2019, 12:34:40 PM »
I thought the same thing as Earl Keese until i saw this one. This is the only short reach SAO trigger i have seen, should work for the 75 variants and TS. Minor fitting may be required in some cases.

CZ SAO Trigger - Short Reach
https://www.armorycraft.com/product-page/cz-sao-trigger-short-reach-blue
The flat SAO trigger is the second shortest reach you can get.  8)

Offline adrian

  • Sr. Member
  • ****
  • Posts: 764
Re: Short reach trigger and SAO?
« Reply #7 on: April 11, 2019, 12:55:18 PM »
     Hiya cz gunner and thx for the thread. Perusing maybe the last year of your threads,have you had any reach issues with your VZ-58? Was it able to take a short reset package ?   I'd say that if the platform you are asking about here is the sp-01,that the short reset package will more than work for your hands,they could even shrink a little and be fine. As you can bypass any DA reach with dropping your hammer with thumb,or racking with your other hand. If your utility allows for considering a 75b-SA, or tactical sports,or TSO you have a factory made SAO and hand size won't be a problem there either. Just as the shadow 2 has a shorter trigger reach than previous shadows,a custom shop can remove some material below the beavertail to improve your existing platform. I'll never be 5' 11" again and we can't grow your fingers longer, but no need to shop for a derringer quite yet. Be well.

 

anything