Author Topic: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole  (Read 468 times)

0 Members and 1 Guest are viewing this topic.

Offline GoNavy!

  • Newbie
  • *
  • Posts: 5
Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« on: April 14, 2019, 01:52:36 AM »
I'm new to the site but have been reading a while. I'm looking for a suitable mount for an optic. I would like to keep the rear sight. I have checked at CZC and the Czech Mate CZC Multi Optic Side Scope Mount 3 Hole (part# 10526) is out of stock. Is there an acceptable or a mount close to this one?

Thx in advance

Offline George16

  • Full Member
  • ***
  • Posts: 442
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #1 on: April 14, 2019, 08:26:29 AM »
For what gun? The optic you mentioned is for a TSO. I have it mounted on my TSO with a trijicon. You can the the mount for the czechmate if it’s available.

Offline adrian

  • Sr. Member
  • ****
  • Posts: 820
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #2 on: April 14, 2019, 09:29:58 AM »
     Hiya and thx for your thread. When I'd bought my CM the mount was fitted to the c-more, so one one option for sight,the one it came with. I guess if other sights have holes in same spots it can work and if screws are the same thread,length etc.
     The cz-usa sight has a mount thats 150, but unknown if this is made in czech republic and which sites can run on it. CZC's mount are over 50less in cost,appear to have a 3 screw and 5 screw variation and milled to accept about a dozen different sights, not sure if cost difference is steel verses aluminum, or non imported tax part verses part with import tax.
     I really don't see either version allowing to keep the factory rear iron while using the mount. Perhaps the design of the shows piccatany rail/rear site combo will be brought to the TSO/CM.
     So sounds like CZC is making them and two basic mounts avail (when made) for a vast variety of sights. And deciding which site may determine which one you should place your order on. If you plan on moving back and forth from red dot to iron sight,consider a sight pusher to save some grief/cost and replace yourself. With failing eyes I assumed a bright 3MOA dot would be the cats meow, I didn't like it much at all, its not for everyone. You might well give cz-usa a call and talk to a smith and /or parts dept to get clear on mount options /costs if ordering there,and possible delivery waits. I doubt there are more than the two options. Be well.

Offline George16

  • Full Member
  • ***
  • Posts: 442
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #3 on: April 14, 2019, 08:25:02 PM »
With the CZ custom multioptic mount, you can still keep your rear sight. However, you need to remove either the mount or rear sight every time you remove the slide from the frame. You’ll be surprised that it’ll still keep it’s zero after you reinstall the mount. Just don’t remove the red dot from the mount. Remove the mount with the red dot still installed on the mount.


Offline GoNavy!

  • Newbie
  • *
  • Posts: 5
Re: TSO CZC Multi Optic Side Scope Mount 3 Hole
« Reply #4 on: April 14, 2019, 10:35:51 PM »
I'm sorry, I have a TSO. I just can't find a mount that holds it above the slide. I posted in here because this was the only place i thought it was clear and it was a CZC part.

Offline GoNavy!

  • Newbie
  • *
  • Posts: 5
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #5 on: April 14, 2019, 10:39:01 PM »
With the CZ custom multioptic mount, you can still keep your rear sight. However, you need to remove either the mount or rear sight every time you remove the slide from the frame. You’ll be surprised that it’ll still keep it’s zero after you reinstall the mount. Just don’t remove the red dot from the mount. Remove the mount with the red dot still installed on the mount.
I called and they gave me two part numbers. 10526 and 10687. Thx

Offline George16

  • Full Member
  • ***
  • Posts: 442
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #6 on: April 15, 2019, 12:07:11 AM »
Get the 10526 then. That’s the correct one for the TSO and which I have installed in mine.

This is the 10526.

Offline GoNavy!

  • Newbie
  • *
  • Posts: 5
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #7 on: April 15, 2019, 04:49:26 AM »
Get the 10526 then. That’s the correct one for the TSO and which I have installed in mine.

This is the 10526.


Perfect! I am just having trouble finding one!!!! or a suitable replacement!

Offline double-d

  • Full Member
  • ***
  • Posts: 146
Re: Czech Mate CZC Multi Optic Side Scope Mount 3 Hole
« Reply #8 on: April 15, 2019, 06:11:18 AM »
Can't help you OP....... but I do like your forum name!

 

anything