Author Topic: Gun case for CZ Scorpion Micro  (Read 881 times)

0 Members and 1 Guest are viewing this topic.

Offline spoooon

  • Jr. Member
  • **
  • Posts: 59
Gun case for CZ Scorpion Micro
« on: April 25, 2019, 12:18:02 PM »
FWIW, bought this: https://www.amazon.com/gp/product/B00JVA7RNI/

Going to plasti-dip the foam later on after I get my 30 round magazines and finalize some stuff. I think the 20.28 liter version would have been a better fit (wouldn't have to have the gun at an angle). Thinking I'll put a sling in the top right part and some magazines in the bottom left.



Online John A.

  • Hero Member
  • *****
  • Posts: 2041
Re: Gun case for CZ Scorpion Micro
« Reply #1 on: April 25, 2019, 12:20:28 PM »
What is the purpose of the plasti dip?
When people ignorant of guns make gun laws, you end up with ignorant gun laws.

Offline spoooon

  • Jr. Member
  • **
  • Posts: 59
Re: Gun case for CZ Scorpion Micro
« Reply #2 on: April 25, 2019, 12:45:22 PM »
What is the purpose of the plasti dip?
It can help strengthen the pluck and foam, especially if you frequently use the case. For some of mine, I don't worry about it. This one, it's mostly because I forgot to reverse it and you can see the sharpie outline. :D

I'll post a pic of one that was Plasti dipped after work.
« Last Edit: April 25, 2019, 01:20:33 PM by spoooon »

Online John A.

  • Hero Member
  • *****
  • Posts: 2041
Re: Gun case for CZ Scorpion Micro
« Reply #3 on: April 25, 2019, 03:27:19 PM »
Rubbing alcohol will remove the sharpy.
When people ignorant of guns make gun laws, you end up with ignorant gun laws.

Offline spoooon

  • Jr. Member
  • **
  • Posts: 59
Re: Gun case for CZ Scorpion Micro
« Reply #4 on: April 25, 2019, 07:19:56 PM »
Thanks for the tip!

Here's a plasti-dipped one. You just spray it on and it sort of gets soaked into the foam. Almost turns it into a single piece.


Offline eastman

  • Hero Member
  • *****
  • Posts: 2350
Re: Gun case for CZ Scorpion Micro
« Reply #5 on: April 25, 2019, 08:15:49 PM »
handy tip for pluck foam - lay the items on the foam and mark where to pluck using toothpicks
I don't look like my avatar!

Offline Bayoubulldog

  • Newbie
  • *
  • Posts: 4
Re: Gun case for CZ Scorpion Micro
« Reply #6 on: April 26, 2019, 09:37:16 PM »
Nice job. I need to set one up like that.

Offline spoooon

  • Jr. Member
  • **
  • Posts: 59
Re: Gun case for CZ Scorpion Micro
« Reply #7 on: May 12, 2019, 07:43:50 AM »
Going to do another layer of plasti-dip to firm it up a little more.


Offline 3xternal

  • Jr. Member
  • **
  • Posts: 37
Re: Gun case for CZ Scorpion Micro
« Reply #8 on: May 14, 2019, 04:45:43 PM »
Looking good!

Offline motorolanut

  • Full Member
  • ***
  • Posts: 227
  • “Character is what you are in the dark.”
Re: Gun case for CZ Scorpion Micro
« Reply #9 on: May 14, 2019, 06:22:35 PM »
Anyone got pics of covert soft cases?
Virtue has united, death shall not separate

Offline Mike-4

  • Newbie
  • *
  • Posts: 5
Re: Gun case for CZ Scorpion Micro
« Reply #10 on: June 29, 2019, 12:42:45 AM »
Any updates?

Offline spoooon

  • Jr. Member
  • **
  • Posts: 59
Re: Gun case for CZ Scorpion Micro
« Reply #11 on: July 06, 2019, 04:51:13 PM »
So, one bad thing about getting a cheapo case is the lack of foam replacements. :D After adding the folding brace, had to redo the foam and can't find a drop in replacement. Ended up buying some foam from some custom foam place, way too soft. It's good enough for now, but I think I'm going to get a Plano or Pelican case down the road.

I could have done a better job of arranging stuff. So annoyed with the foam that I decided good enough is good enough for the time being.


Offline Asylum9

  • Full Member
  • ***
  • Posts: 190
Re: Gun case for CZ Scorpion Micro
« Reply #12 on: July 06, 2019, 09:32:46 PM »
You can buy pick and pluck or regular foam sheets and cut it to fit. The downside is most of the sheets I've found are $20 and up depending on size and thicknesses.
Anyone have a good source for foam?
ApIII%

Offline spoooon

  • Jr. Member
  • **
  • Posts: 59
Re: Gun case for CZ Scorpion Micro
« Reply #13 on: July 06, 2019, 11:27:33 PM »
You can buy pick and pluck or regular foam sheets and cut it to fit. The downside is most of the sheets I've found are $20 and up depending on size and thicknesses.
Anyone have a good source for foam?
The place I ordered from, Foam Factory, the foam is way too soft.