New Rami BD

[gunbuster]

Oh I've been looking for over five months now.  The BD is nearly impossible to find in CA.

[theoldmusicman]

I still have not figured out how to get a pic to post.  How'd you do it?

I still haven't figured out how to do it from my laptop, which is what I'm on most of the time.  I installed Tapatalk on my cell phone and set up the forum on there.  Once I did that it was fairly easy to post a picture, provided you have the picture on your phone.

[psion55]

Thanks for the reply!  I use my desk top.  I have yet to use my phone to get on the internet. 

By the way, I have a RAMI (manual safety) that I installed the CGW pro package in.  I highly
recommend it.  At first look I thought it would be a job and a half.  Turned out to be not half
bad with the instructional video that CGW has up.

[theoldmusicman]

Thanks for the reply!  I use my desk top.  I have yet to use my phone to get on the internet. 

By the way, I have a RAMI (manual safety) that I installed the CGW pro package in.  I highly
recommend it.  At first look I thought it would be a job and a half.  Turned out to be not half
bad with the instructional video that CGW has up.

I'm thinking seriously about the pro package also.  I could probably do it myself, or I have a friend who's a gunsmith and he rarely charges me very much, if anything, to work on my firearms, so I might get him to do it.

[PappaWheelie]

The Rami has a steeper feed ramp than CZ75s, so it might have a harder time feeding flat nosed bullets, particularly heavier (longer) bullets.

Nay, not so MeatAxe; the angle is exactly the same although its length is a tad shorter. See pic (last URL link in this post):
https://czfirearms.us/index.php?topic=102671.msg803459#msg803459

[cousinmark]

 ...I'm loving my RAMI BD. I'm at 630 rounds without a hiccup :-)

    I'm not sure about the feed ramp angles? I have noticed the feed ramp on my new PCR is black while my RAMI's is a more highly polished silver? I'd stick with a good quality RN FMJ for the first 500 rounds or so if you can. JMO

   Glad you were able to get out with the new shooter musicman :-)

[theoldmusicman]

...I'm loving my RAMI BD. I'm at 630 rounds without a hiccup :-)

    I'm not sure about the feed ramp angles? I have noticed the feed ramp on my new PCR is black while my RAMI's is a more highly polished silver? I'd stick with a good quality RN FMJ for the first 500 rounds or so if you can. JMO

   Glad you were able to get out with the new shooter musicman :-)

The feed ramp on mine is polished also.  I could have caused the FTF by limp wristing it.  Limp wristing will cause all sorts of issues, maybe this was one of them.  Next time I go to the range I'll see is I can duplicate the problem. 

[MeatAxe]

The Rami has a steeper feed ramp than CZ75s, so it might have a harder time feeding flat nosed bullets, particularly heavier (longer) bullets.

Nay, not so MeatAxe; the angle is exactly the same although its length is a tad shorter. See pic (last URL link in this post):
https://czfirearms.us/index.php?topic=102671.msg803459#msg803459

Huh...maybe the SP-01 barrel is different from other CZ75s? I don't know, I was comparing my Rami and P-01 barrels, and not only is the Rami feed ramp shorter (and blunt at the bottom) compared to my P-01, but it seems to be at a slightly steeper angle than the P-01 if you put the photos up side by side:

http://shop.cz-usa.com/images/items/FullSize/0640049001.png

https://media.midwayusa.com/productimages/880x660/Primary/675/675627.jpg

[theoldmusicman]

Thanks for the reply!  I use my desk top.  I have yet to use my phone to get on the internet. 

By the way, I have a RAMI (manual safety) that I installed the CGW pro package in.  I highly
recommend it.  At first look I thought it would be a job and a half.  Turned out to be not half
bad with the instructional video that CGW has up.

Do you have a link to that video?  I haven't been able to find any instructional video on the rami bd.

[psion55]

Do you have a link to that video?  I haven't been able to find any instructional video on the rami bd.
[/quote]

Even though this is for the SP-01 it's all basically the same guts.  It'll get you where you need to go.  It worked for my CZ 75B,
Compact, and my Rami.  The only problem you might run into is this is for the manual safety. 

https://forums.brianenos.com/topic/191773-cz-tuning-101-with-professor-atlas/

Good luck!

[psion55]

Do you have a link to that video?  I haven't been able to find any instructional video on the rami bd.
[/quote]

This thread might also help:

Rami BD Hammer removal with pictures

[theoldmusicman]

Do you have a link to that video?  I haven't been able to find any instructional video on the rami bd.

This thread might also help:

Rami BD Hammer removal with pictures
[/quote]

That link doesn't work.

[jack76590]

 .

The feed ramp on mine is polished also.  I could have caused the FTF by limp wristing it.  Limp wristing will cause all sorts of issues, maybe this was one of them.  Next time I go to the range I'll see is I can duplicate the problem.
[/quote]

My rami bd feed fmj fine but hung up on jhp. A VERY STIFF magazine spring seems to have corrected problem. I think slide was catching rear of case high up causing a bit of a nose dive which was ok with fmj ammo, but not jhp. I put in wolff spring for FULL size cz 75 and chose +10% version. Spring is strong to point a bit hard to install. But mag will still take 10 rounds. I first tried Wolff +10% for compact 75 but that weaker than factory spring for Rami. Link if interested in wolff spring. Use pull down menu to get +10% spring.
https://www.gunsprings.com/CZ/75%20Series/cID1/mID16/dID91#842

[psion55]

Rami BD Hammer removal with pictures
[/quote]

That link doesn't work.
[/quote]

Oops, sorry.  Just put it in the search box at the top of the page.  It's another thread in this forum.  I should
have mentioned that.

[theoldmusicman]

No problem.  I did a search and found it.  Helpful info.  Thanks again!