CZ P10C FDE SKU differences? 01521/01524/01532

[DeeJay40]

Hi everyone. New here. Just purchased a CZ P10C FDE (SKU 01521) online this evening and wanted to make sure I purchased the right model. I was looking for the older ambidextrous mag release version, which I think is the 01521 model. This is what i gathered from different online gun shop product specs, youtube reviews, etc. Can anyone confirm accuracy or elucidate further?

CZ P10C FDE:

01521/91521 - 2017. w/ambidextrous mag release (discontinued, replaced by 01532/91532)
01524/91524 - no night sight (due to production delay issue); standard three-dot sight only
01532/91532 - 2018+. Swappable mag release, slide backing plate's inside lower edge beveled to prevent jam, groove fix to prevent striker rotation

9 prefix - 15+1 model
0 prefix - 10+1 low capacity model (NJ compliant)


Thanks in advance

[armoredman]

To be completely honest, I have never once in my decades of CZ ownership and promotion, ever referred to them by SKU. Is P-10C FDE, first gen, transitional, or second gen.
The easiest way is to see what CZ-USA lists on the website - if that number isn't the newest one, then it isn't the gen 2. My FDE is actually Gen 1, one of the very first ones imported, about 3,000 rounds though it and running in great shape.

[seebee62]

My P10C FDE is 91521. Test fire date is August 2018. Ambi Mag release and night sights. Notch in slide plate.

I bought it January 2019.


Sent from my iPhone using Tapatalk Pro

[Hickeroar]

My P10C FDE is 91521. Test fire date is August 2018. Ambi Mag release and night sights. Notch in slide plate.

I bought it January 2019.


Sent from my iPhone using Tapatalk Pro

Where did you find the test fire date?

[seebee62]

My P10C FDE is 91521. Test fire date is August 2018. Ambi Mag release and night sights. Notch in slide plate.

I bought it January 2019.


Sent from my iPhone using Tapatalk Pro

Where did you find the test fire date?

It?s a sheet of paper that came with both my P10C and P07 with a target representation showing POA and POI during the test fire.






Sent from my iPhone using Tapatalk Pro

[BrenToo]

My CZ P-10C is 91531 made in CZECH Republic with swappable mag release... Test fire date is January 2019.

[Wobbly]

My P10c Black is 91520. Test fire date is September 2017. Czech made, ambi mag release, standard sights. Notch in slide plate.

[david8613]

Mine is is cz p10c suppressor ready sku# 01523, U.S .made Kansas city, ambidextrous everything, suppressor height night sights, also has notch in slide plate. born on date of 11/2018. Slide release is stiff as all hell impossible to activate unless I hit it at both side of slide release at the same time, mag release is getting better it was also very hard to press, trigger was excellent out the box no complaints there.

[mickey66]

Hi everyone. New here. Just purchased a CZ P10C FDE (SKU 01521) online this evening and wanted to make sure I purchased the right model. I was looking for the older ambidextrous mag release version, which I think is the 01521 model. This is what i gathered from different online gun shop product specs, youtube reviews, etc. Can anyone confirm accuracy or elucidate further?

CZ P10C FDE:

01521/91521 - 2017. w/ambidextrous mag release (discontinued, replaced by 01532/91532)
01524/91524 - no night sight (due to production delay issue); standard three-dot sight only
01532/91532 - 2018+. Swappable mag release, slide backing plate's inside lower edge beveled to prevent jam, groove fix to prevent striker rotation

9 prefix - 15+1 model
0 prefix - 10+1 low capacity model (NJ compliant)


Thanks in advance

Hello,my CZ P-10 C #sku 91521 built in Czech Republic, Feb 10 2018 Test Fire date of Gun so says my paperwork. Gun accepted into port of entry USA 1-16-2019. Purchase of this Gun @ LGS 1-19-2019. This Gun came with stock Night-sights Green dots. in FDE....The date range of this FDE pistol is 2017  thru 2018. My Mags are the newer type with 2 slots on each side w/orange follower! I have a Buddy that has a 2017 built P-10 C and mags have 1 slot on each side....He's had no problems with his Gun. My Mag and slide release was sticky but after 350 rounds down range Gun loosened up and is smooth as silk. rounds 15+1. Hope this helps, M PS: Fully ambidextrous Mag release and night sights(green dots). Notch in back slide plate at 3 pm. Has all the latest upgrades. I would call this a TRANSITION Gun!

[mickey66]

To be completely honest, I have never once in my decades of CZ ownership and promotion, ever referred to them by SKU. Is P-10C FDE, first gen, transitional, or second gen.
The easiest way is to see what CZ-USA lists on the website - if that number isn't the newest one, then it isn't the gen 2. My FDE is actually Gen 1, one of the very first ones imported, about 3,000 rounds though it and running in great shape.

I agree with this 100% However, the SKU# was of great help in helping me figure out what the heck I had just bought! I mean, my Gun has the new Mags but is a discontinued Model, right? Built & Test fired in early 2018...shipped in early 2019 AND these Guns were hard to find at any LGS in Arizona....was very confusing to me at first!

[mickey66]

I just found this for all who don't know yet....Mags for the CZ P10C pistol. "Gen 2 pistols may not be able to use old mags, but gen 1 pistols are able to use new mags(Gen 2)." I found this on another forum and explains my Gun(91521), I think? I have a Gen 1 P10C but was shipped with the newer Gen 2 Mags which will fit in a Gen 1 Gun. The P10C Gen 2 Mag has 2 slots cut into the Mag & the Gen 1 P10C Mag have only 1 slot cut into the Mag....1 slot cut on each side of Mag....Gen 2 Mag has 2 slots cut on each side of Mag. P10C Gen 2 Mags will work in Gen 1 Guns! Gen 1 Mags won't work in the New(Gen 2) P10C Pistol.   Hope this is clear M