Install CGW Trigger

[Ohmslaw]

Is there a good video on full dissembling of P-01? Do you have to take sear  cage out of pistol to get trigger out? Having issues can?t find good video on it
Thanks
Ohmslaw

[Cali CZ]

Is there a good video on full dissembling of P-01? Do you have to take sear  cage out of pistol to get trigger out? Having issues can?t find good video on it
Thanks
Ohmslaw

Here is one of an SP-01 tatical which is about the same. If you sift through "Work the triggers" videos enough, i believe you may find the P0-1 that he did.
I've fb messaged him on the past and he is pretty good about helping out..
https://youtu.be/QoT3zcASKio

Sent from my SM-G930V using Tapatalk

[bingcz]

Do not think it needs to dissemble sears for changing trigger.

Sent from my SM-N950U using Tapatalk

[Ohmslaw]

Thanks for video very helpful have seen before but couldn?t find it. You have to disassemble all trigger won?t come out on decocker like a standard 75 safety style will.
Ohmslaw

[Sulpgnir]

Is there a good video on full dissembling of P-01? Do you have to take sear  cage out of pistol to get trigger out? Having issues can?t find good video on it
Thanks
Ohmslaw

Do not think it needs to dissemble sears for changing trigger.

Since the DA disconnector is hooked up to the trigger bar, I think you will need to remove the sear cage to "unhook" them first.

Here's romukom's illustration:


If you have a decocking model, you don't need to disassemble the sear cage by using a slave sear cage pin.  CGW has video tutorials on its site.  If you are lucky enough to have a safety model, just remove the safety and then lift the entire sear cage out of the frame.

Last week I did a trigger job and replaced some springs on my P-01.  You can find my thread under CZ Gunsmithing.

[Ohmslaw]

Thanks gentlemen finally got it apart and back together from video supplied and CGW pics and video. Their video is to vague doesn?t show close up on parts orientation. It does show best way to put sear cage together. Even trigger spring was a pain had to make a perfect length slave pin for it. The whole job is an experience probably took me 4-6 hours total, pro could have done it in a hour counting polishing. Well I know how to do it now but don?t want to for awhile a real pain. Makes you wonder how this pistols work so well with all these parts.
Thanks for help
Ohmslaw