Increase single action weight, tuned Omega trigger

[Desert Tortoise]

I have a P07 with all the Cajun parts including the hammer and defensive weight spring. I'm using the decocker levers.

My double action is where I want it at 7.5 lbs but single action is just over 2 lbs

How can I increase the single action weight by about 1 lb?

[Sulpgnir]

I have a P07 with all the Cajun parts including the hammer and defensive weight spring. I'm using the decocker levers.

My double action is where I want it at 7.5 lbs but single action is just over 2 lbs

How can I increase the single action weight by about 1 lb?

Work from front to back:  Heavier trigger return spring, heavier sear spring and heavier mainspring.  May need all three to add 1lb.  DA will be affected if heavier mainspring is used.

[Tok36]

^^What he said.

[Desert Tortoise]

Thanks for the help

[Desert Tortoise]

Forgot to follow up.

Replaced the +sear spring (yellow) with the ++ sear spring (natural color). This got me the extra 1lb I was looking for.

[Tok36]

Thank you for the follow up, it is always good to see the individual outcome of these things.

[deadsh0t]

So, to do the opposite (decrease SA weight) you need a lighter sear spring? All of this while maintaining the same DA weight.

I thought trigger return spring would affect both

[Desert Tortoise]

Cajuns Omega hammer requires an increased weight sear spring vs stock in order to prevent hammer follow.

Their sear spring kit has  + and ++ springs but I don't thing there is - spring available