Author Topic: Putting new barrel in CZ P09.  (Read 677 times)

0 Members and 1 Guest are viewing this topic.

Offline besmirched

  • Jr. Member
  • **
  • Posts: 47
Putting new barrel in CZ P09.
« on: June 17, 2019, 11:23:24 PM »
Blew up my pistol today with a fart load squib...have to buy another barrel for the P09...so does anyone have any experience putting a new barrel in their P07-P09 and did it just drop in like a Glock?  Or does it need some minor fitting.   If I can just drop it in I could save the money and time sending it back to the mothership for rehab. 

Offline Yankchef

  • Full Member
  • ***
  • Posts: 157
Re: Putting new barrel in CZ P09.
« Reply #1 on: June 18, 2019, 02:50:14 AM »
The 07/09 were designed to be easy to change out parts. Mine have just dropped in, I have not used a primary machine barrel in an 07/09 just a 10. From my understanding there is a very small chance that fitting will be required but highly unlikely

Sent from my H8266 using Tapatalk


Offline briang2ad

  • Hero Member
  • *****
  • Posts: 2424
Re: Putting new barrel in CZ P09.
« Reply #2 on: June 22, 2019, 08:49:23 AM »
Google works pretty well.
https://www.youtube.com/watch?reload=9&v=r9i32iirSFs

Easy peasy.  It might drop in if standard factory.

Offline besmirched

  • Jr. Member
  • **
  • Posts: 47
Re: Putting new barrel in CZ P09.
« Reply #3 on: June 22, 2019, 10:08:21 PM »
Google works pretty well.
https://www.youtube.com/watch?reload=9&v=r9i32iirSFs

Easy peasy.  It might drop in if standard factory.

Thanks for the link...looks relatively straightforward.  Just waiting on a barrel to be in stock. 

Offline PnoyGeek

  • Full Member
  • ***
  • Posts: 174
Re: Putting new barrel in CZ P09.
« Reply #4 on: June 22, 2019, 10:35:18 PM »
Blew up my pistol today with a fart load squib...have to buy another barrel for the P09...so does anyone have any experience putting a new barrel in their P07-P09 and did it just drop in like a Glock?  Or does it need some minor fitting.   If I can just drop it in I could save the money and time sending it back to the mothership for rehab.

I used to have a P-07 Duty with the extended barrel (non-threaded) and I was able to a buy a used 3.5" barrel from CZ-USA and it was just a drop-in replacement.  I might have been just lucky but it was my understanding that the P-07 was designed so that the part are interchangeable with no fitting required or just minimal fitting.

Offline besmirched

  • Jr. Member
  • **
  • Posts: 47
Re: Putting new barrel in CZ P09.
« Reply #5 on: July 06, 2019, 11:13:26 AM »
Heads up for any one that needs parts for their CZ pistols.  CZ USA has 20% off from July 4 thru the 8th on parts.   So I was able to purchase a new threaded barrel for my disabled CZ P09 for the same price as a standard barrel.  The standard barrels are out of stock everywhere, so I jumped on the chance.  Looking forward to finally getting my P09 up and running again. 

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 5163
  • I've shot the rest, I now own the best - CZ
Re: Putting new barrel in CZ P09.
« Reply #6 on: July 06, 2019, 12:11:48 PM »
You know how that works, right?

I needed a new barrel for my Pre B CZ85 a few years back.  The standard length barrels were out of stock.  I ordered a threaded barrel, made the mods to the slide to get it to fit/work, fitted the barrel to the slide and took it to the range to sight it in.

Not quite 2 weeks later the standard barrels were back in stock again.

Hey, it looks "cooler" with the threaded barrel anyway.
I stopped carrying the SIG 556R.  SIG changed models and couple/three times and stopped supporting it with parts.  So, I stopped supporting SIG.  Back to the tried/true AR15 Carbine.

Offline thedude

  • Full Member
  • ***
  • Posts: 414
Re: Putting new barrel in CZ P09.
« Reply #7 on: July 06, 2019, 01:00:44 PM »
Blew up my pistol today with a fart load squib...have to buy another barrel for the P09..

So did you fire another round with a squib in the barrel?  I've had squibs before and was fortunate enough to notice before I did a tap/rack/boom to clear the malfunction.  Were you running reloads or factory ammo? 

Offline besmirched

  • Jr. Member
  • **
  • Posts: 47
Re: Putting new barrel in CZ P09.
« Reply #8 on: July 07, 2019, 12:46:34 AM »
You know how that works, right?

I needed a new barrel for my Pre B CZ85 a few years back.  The standard length barrels were out of stock.  I ordered a threaded barrel, made the mods to the slide to get it to fit/work, fitted the barrel to the slide and took it to the range to sight it in.

Not quite 2 weeks later the standard barrels were back in stock again.

Hey, it looks "cooler" with the threaded barrel anyway.

I thought the same thing soon as I hit the buy button...LOL.    I have been shooting my XD lately and tho it is a good pistol, I cant stop fondling and dry firing the P 09.   Cant wait to get it up and running.

Offline besmirched

  • Jr. Member
  • **
  • Posts: 47
Re: Putting new barrel in CZ P09.
« Reply #9 on: July 07, 2019, 12:52:43 AM »
Blew up my pistol today with a fart load squib...have to buy another barrel for the P09..

So did you fire another round with a squib in the barrel?  I've had squibs before and was fortunate enough to notice before I did a tap/rack/boom to clear the malfunction.  Were you running reloads or factory ammo?

Yes, was shooting pretty fast and didn't notice the squib in time. Felt a slightly bigger bang and the slide locked back from the bulged barrel being lodged in the barrel hood.  Had to knock it out with a nylon hammer when I got home.  The CZ must be a pretty tough pistola because it took it pretty much in stride with just a slightly bulged barrel and a ruined extractor spring.  And yes they were my reloads. 

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 18689
Re: Putting new barrel in CZ P09.
« Reply #10 on: July 07, 2019, 03:06:45 AM »
Amigo, I'm just glad YOU are OK.  :o

Offline besmirched

  • Jr. Member
  • **
  • Posts: 47
Re: Putting new barrel in CZ P09.
« Reply #11 on: July 07, 2019, 10:52:47 AM »
Amigo, I'm just glad YOU are OK.  :o

Thanks.  No problem.   But I have seen a lot worse.   Frames blown out.  Even slides ruined.  So, guess I got lucky.  That, and the pistol is one tough hombre!

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 2424
Re: Putting new barrel in CZ P09.
« Reply #12 on: July 07, 2019, 03:59:04 PM »
Amigo, I'm just glad YOU are OK.  :o

Thanks.  No problem.   But I have seen a lot worse.   Frames blown out.  Even slides ruined.  So, guess I got lucky.  That, and the pistol is one tough hombre!

Amen - glad you are fine, and the pistol is serviceable.  Some years back one of my sons told me he felt something odd when shooting an AK.  I took the weapon, cleared it, but a round was in the barrel.  Tula squib.  My son was likely only 14-15, but knew something was wrong.  Good for him.