Author Topic: Kadet kit on PCR frame - slide stop modification  (Read 451 times)

0 Members and 1 Guest are viewing this topic.

Offline Leshka71

  • Jr. Member
  • **
  • Posts: 41
Kadet kit on PCR frame - slide stop modification
« on: August 05, 2019, 09:06:02 PM »
For those who want their Kadet slide to stay open after last round. The groove in the slide stop has to be modified by 1mm.  On pictures: 1st is original PCR stop (distance to the groove is 23.4mm). 2nd is unmodified Kadet stop (distance to the groove is 22.4mm). 3rd is modified Kadet stop (same distance as on original PCR stop).






Sent from my iPhone using Tapatalk

Offline compact user

  • Newbie
  • *
  • Posts: 4
Re: Kadet kit on PCR frame - slide stop modification
« Reply #1 on: August 10, 2019, 02:34:34 AM »
Hello Leshka71 thanks for the post..  Can you use the modified slide stop  in the PCR with the 9mm slide and barrel or will you need a new slide stop?

Offline Leshka71

  • Jr. Member
  • **
  • Posts: 41
Re: Kadet kit on PCR frame - slide stop modification
« Reply #2 on: August 10, 2019, 10:57:40 AM »
You can’t use Kadet stop with PCR slide. 9mm magazine will block its movement.  On another hand you can use PCR stop with Kadet slide, but it will not keep it open after last round.


Sent from my iPhone using Tapatalk

Offline compact user

  • Newbie
  • *
  • Posts: 4
Re: Kadet kit on PCR frame - slide stop modification
« Reply #3 on: August 11, 2019, 12:56:23 PM »
Thank you.

Offline DenStinett

  • Hero Member
  • *****
  • Posts: 5742
  • HALT, Who goes there?
Re: Kadet kit on PCR frame - slide stop modification
« Reply #4 on: August 11, 2019, 08:43:16 PM »
But you can (and in most cases should) use the PCR Slide Stop when using your KADET Kit on you PCR Lower
In the past, CZ sent you a PCR Slide Stop for use with your KADET if you ask
So tell me again how Trump will be worse then the last 8 years !

Offline Leshka71

  • Jr. Member
  • **
  • Posts: 41
Re: Kadet kit on PCR frame - slide stop modification
« Reply #5 on: August 11, 2019, 09:03:02 PM »
They will send you Kadet Stop FOR PCR and that is the one I had to modify.



Sent from my iPhone using Tapatalk

Offline compact user

  • Newbie
  • *
  • Posts: 4
Re: Kadet kit on PCR frame - slide stop modification
« Reply #6 on: August 12, 2019, 02:29:41 AM »
Thanks for the part number.  This will come in handy.  I have a CZ 75 compact (Czechoslovakia made) and  recently acquired a NIB PCR.  The slide stop from my Kadet II kit was too tight initially but I lessened the stop diameter by carefully sanding this down to establish function in my old CZ75 Compact.  This modified Kadet II slide stop will fit in the PCR but not function at all.  The PCR slide stop will fit the Kadet assembly but does not hold open on an empty Kadet II magazine.  Interestingly, my empty Compact CZ magazines will not hold the slide open in the PCR.  I think I can remedy this with new followers (like the ones in my PCR) inthe older magazines.  I wish it was as easy a fix for the Kadet II magazines.

Offline timetofly

  • Full Member
  • ***
  • Posts: 365
Re: Kadet kit on PCR frame - slide stop modification
« Reply #7 on: August 12, 2019, 08:18:41 AM »
But you can (and in most cases should) use the PCR Slide Stop when using your KADET Kit on you PCR Lower
In the past, CZ sent you a PCR Slide Stop for use with your KADET if you ask

This is my experience also.  Called and they sent out the correct slide stop no questions asked

Offline compact user

  • Newbie
  • *
  • Posts: 4
Re: Kadet kit on PCR frame - slide stop modification
« Reply #8 on: August 12, 2019, 09:07:20 PM »
Thanks to all weighing in on this thread.  A nice lady in the parts dept of CZ USA said they would send the slidestop to me under warranty.  Will see if I have to do Leshka's modification.  She was also nice enough to lookup the plastic baseplate part  to enable shortening the Kadet magazine.

 

anything