Author Topic: Looking for Scorpion Sights  (Read 801 times)

0 Members and 1 Guest are viewing this topic.

Offline jtice

  • Newbie
  • *
  • Posts: 2
Looking for Scorpion Sights
« on: September 05, 2019, 04:39:04 PM »
Anyone know where you can buy the sights that come on the Scorpion?
Or any sights that are very similar?
I cant seem to find any low profile sights like the Scorpions at all.

Offline mtl111

  • Full Member
  • ***
  • Posts: 192
Re: Looking for Scorpion Sights
« Reply #1 on: September 05, 2019, 05:02:07 PM »
I've got Troy micro HK front and rear sights on mine. Love em!

Sent from my SAMSUNG-SM-G930A using Tapatalk


Offline the war wagon

  • Jr. Member
  • **
  • Posts: 93
  • Mafioso of the Apocalypse
Re: Looking for Scorpion Sights
« Reply #2 on: September 05, 2019, 06:53:25 PM »
I JUST sold the ones off my 805 (which are identical), but like mtl111, I went with Troy.  I run 'em on ALL my AR's - they're the same as my PTR91 - so I'm already used to 'em.
- Either you're part of the problem or you're part of the solution or you're just part of the landscape - Sam (Robert DeNiro) in, "Ronin" -

Offline coanan

  • Jr. Member
  • **
  • Posts: 39
Re: Looking for Scorpion Sights
« Reply #3 on: September 05, 2019, 07:37:52 PM »
What are the worth?

Offline TjB101

  • Newbie
  • *
  • Posts: 14
Re: Looking for Scorpion Sights
« Reply #4 on: September 06, 2019, 06:17:44 AM »
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

Offline motorolanut

  • Full Member
  • ***
  • Posts: 370
  • “Character is what you are in the dark.”
Re: Looking for Scorpion Sights
« Reply #5 on: September 07, 2019, 08:44:04 AM »
MBUS PRO not the standard plastic ones.
Virtue has united, death shall not separate

Offline the war wagon

  • Jr. Member
  • **
  • Posts: 93
  • Mafioso of the Apocalypse
Re: Looking for Scorpion Sights
« Reply #6 on: September 07, 2019, 06:19:48 PM »
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

EXACTLY!  Full size Troy's (and probably any other BUIS) co-witness well with most red dots.
- Either you're part of the problem or you're part of the solution or you're just part of the landscape - Sam (Robert DeNiro) in, "Ronin" -

Offline Henny

  • Newbie
  • *
  • Posts: 4
Re: Looking for Scorpion Sights
« Reply #7 on: September 08, 2019, 07:14:59 PM »
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

EXACTLY!  Full size Troy's (and probably any other BUIS) co-witness well with most red dots.

I must be the odd guy. The Scorpion sights are just right for me and readily cowitness with my Aimpoint. Then again, I’m the guy that the right side safety paddle doesn’t bother either!   ;D



https://imgur.com/a/oa5opoL

ETA: for some reason or another I can’t post pictures on the board from my iPad.  :-\
« Last Edit: September 08, 2019, 07:25:25 PM by Henny »

Offline stevep1794

  • Newbie
  • *
  • Posts: 15
Re: Looking for Scorpion Sights
« Reply #8 on: September 09, 2019, 08:19:37 AM »
Are you looking for a pair of factory sights?? PM me. I don't need mine

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 3662
Re: Looking for Scorpion Sights
« Reply #9 on: September 16, 2019, 11:08:51 PM »
What are the worth?
A set just sold on Ebay for $161 plus shipping.

Offline jtice

  • Newbie
  • *
  • Posts: 2
Re: Looking for Scorpion Sights
« Reply #10 on: September 17, 2019, 07:23:39 AM »
Thanks to those that have offered me some sites for sale.
but I think I'm actually going to go a different route. Was actually looking for a set for a kpos scout. Which now is on backorder for quite a while.
Looks like you guys can make Bank on eBay with them though!

Offline John A.

  • Hero Member
  • *****
  • Posts: 2151
Re: Looking for Scorpion Sights
« Reply #11 on: September 17, 2019, 09:01:53 AM »
The factory sights on my Scorpion are fine if you are shooting it as a pistol.  If you have a brace, and try to cheek weld the stock, the sights are too low to use.  Get something with some additional height.

I found the opposite to be true.

The taller height AR15 sights and eotech threw off my cheek weld and it turned more into a chin weld.

I guess this is subjective to the person behind the gun, but I always snug down pretty good on a stock or brace or whatever.  Too many years of shotgunning has taught me what happens when you aren't holding a gun correctly and is just carried over from that.
When people ignorant of guns make gun laws, you end up with ignorant gun laws.