Author Topic: any aftermarket supressor height sights?  (Read 4524 times)

0 Members and 1 Guest are viewing this topic.

Offline phr1990

  • Newbie
  • *
  • Posts: 12
any aftermarket supressor height sights?
« on: September 29, 2019, 02:25:55 PM »
Looking for tall sights to an optics ready to cowitness with an acro. CZs website says they have some in development. The aftermarket beat them to the punch yet? i cant find anything.

Offline .45 acp nut

  • Full Member
  • ***
  • Posts: 135
Re: any aftermarket supressor height sights?
« Reply #1 on: October 03, 2019, 04:30:16 PM »
I'd be Interested, too.
Sempr Fi!

Offline davekoch

  • Full Member
  • ***
  • Posts: 194
Re: any aftermarket supressor height sights?
« Reply #2 on: October 04, 2019, 09:09:07 PM »
Dawson Precision has sights of various heights for probably all the CZs.  I don't think they have a suppressor height set, but you can select custom heights with a front sight and rear sight purchased individually.

 They have a calculator on the site that helps you determine what you need.

https://dawsonprecision.com/sights/cz-sights/

 I have an OEM tritium CZ suppressor height set that I'm going to put up for sale in a few weeks. I just want to make sure my custom sight setup zeros properly first.

Let me know and I can take some measurements of the CZ sights if anyone needs it.
« Last Edit: October 04, 2019, 09:13:27 PM by davekoch »

Offline phr1990

  • Newbie
  • *
  • Posts: 12
Re: any aftermarket supressor height sights?
« Reply #3 on: October 07, 2019, 02:07:26 PM »
i called cz they said they are releasing sights as a combo with plates now nd will release separate sights on their own down the world. I think just rmr and deltapoint plates now,

Offline 01svtL

  • Jr. Member
  • **
  • Posts: 42
Re: any aftermarket supressor height sights?
« Reply #4 on: October 10, 2019, 11:39:04 AM »
Dawson Precision has sights of various heights for probably all the CZs.  I don't think they have a suppressor height set, but you can select custom heights with a front sight and rear sight purchased individually.

 They have a calculator on the site that helps you determine what you need.

https://dawsonprecision.com/sights/cz-sights/

 I have an OEM tritium CZ suppressor height set that I'm going to put up for sale in a few weeks. I just want to make sure my custom sight setup zeros properly first.

Let me know and I can take some measurements of the CZ sights if anyone needs it.

Please post the height on your OEM front suppressor sight when you can.  I have them on mine but don’t have a tool to measure accurately with.

Offline davekoch

  • Full Member
  • ***
  • Posts: 194
Re: any aftermarket supressor height sights?
« Reply #5 on: October 14, 2019, 08:00:29 AM »
Here are the dimensions of the OEM H3 sights off my Suppressor Ready P10C:

Front:

Base to top of blade: 0.414"
Just the blade: 0.318
Blade Width: 0.126"

Rear:

Height (not including dovetail): 0.465"








« Last Edit: October 14, 2019, 08:07:59 AM by davekoch »

Offline 01svtL

  • Jr. Member
  • **
  • Posts: 42
Re: any aftermarket supressor height sights?
« Reply #6 on: October 28, 2019, 10:30:51 AM »
Thanks!

Offline earlan357

  • Sr. Member
  • ****
  • Posts: 552
Re: any aftermarket supressor height sights?
« Reply #7 on: October 28, 2019, 11:32:07 AM »
Suppressor ready and optics ready rear sights are different.  The only source for tall sights that fit the Optic Ready are from CZ, and they're only available in kits with optic plates for now, if you can find them in-stock.  I blacked out the rear dots.  They're fine with RMR/Holosun 507, but just barely usable with an SRO.  Probably fine with every other RDS except the much taller DPP.



« Last Edit: November 08, 2019, 01:15:08 PM by earlan357 »

Offline Hox013

  • Jr. Member
  • **
  • Posts: 27
Re: any aftermarket supressor height sights?
« Reply #8 on: October 29, 2019, 11:28:27 AM »
Are those steel or aluminum?

Offline earlan357

  • Sr. Member
  • ****
  • Posts: 552
Re: any aftermarket supressor height sights?
« Reply #9 on: October 30, 2019, 12:40:22 AM »
Are those steel or aluminum?

CZ-USA plates are steel.

Offline davekoch

  • Full Member
  • ***
  • Posts: 194
Re: any aftermarket supressor height sights?
« Reply #10 on: October 31, 2019, 03:06:04 PM »
Suppressor ready and optics ready rear sights are different.
Different how?


Offline earlan357

  • Sr. Member
  • ****
  • Posts: 552
Re: any aftermarket supressor height sights?
« Reply #11 on: October 31, 2019, 03:23:49 PM »
Suppressor ready and optics ready rear sights are different.
Different how?

The Optics Ready rear sight dovetail is cut further back than the standard/suppressor ready models. So regular P10/Shadow2 rear sights will overhang the slide on an OR.


Offline davekoch

  • Full Member
  • ***
  • Posts: 194
Re: any aftermarket supressor height sights?
« Reply #12 on: October 31, 2019, 03:31:30 PM »
That's interesting. I didn't notice that little detail. Thanks for the side by side.  It makes sense that they wanted to make more room for the optic plate.

 The dovetail itself is the same though?

Offline earlan357

  • Sr. Member
  • ****
  • Posts: 552
Re: any aftermarket supressor height sights?
« Reply #13 on: October 31, 2019, 03:52:50 PM »
That's interesting. I didn't notice that little detail. Thanks for the side by side.  It makes sense that they wanted to make more room for the optic plate.

 The dovetail itself is the same though?

I think so, but I don't have a regular sight anymore to confirm.

Offline phr1990

  • Newbie
  • *
  • Posts: 12
Re: any aftermarket supressor height sights?
« Reply #14 on: October 31, 2019, 08:32:41 PM »
i wouldnt mind a slight overhang as long as its solid. Hope cz ramps up their production.