Author Topic: CZ Bren Picture Thread?  (Read 7759 times)

0 Members and 1 Guest are viewing this topic.

Offline Tsar

  • Newbie
  • *
  • Posts: 14
Re: CZ Bren Picture Thread?
« Reply #45 on: February 12, 2020, 07:55:39 PM »
I don’t see why not. Dan Haga Design still an arm brace with adapter.  This is ASSUMING your barrel to receiver end length falls within the “pistol” category.  It’s it’s currently a pistol, it will remain a pistol with this brace.


Please stop bringing up the erroneous length measurement aspect for pistols. There is no minimum or maximum overall length to "pistols" as far as the ATF is concerned. The only time it matters is if you have to deal with it is in Michigan (currently on MI, let's hope it stays that way) or if you want to add a VFG. (Barrel < 16in, OAL >26in, no stock and VFG counts as a "firearm" as opposed to AOW or SBR)


Calm down. Please tell me where I gave “erroneous lengths” in my comment.  Hint: I didn’t.  I simply said if the firearm is recognized as a pistol, adding a brace does not change it from being a pistol. 


Sent from my iPhone using Tapatalk

"This is ASSUMING your barrel to receiver end length falls within the “pistol” category. "

This line is erroneous, as there are no "length" measurements in the definition of a pistol. Please, don't take it personally, it's a common bit of misinformation that's been making the rounds lately. Sorry if I seemed like a dick.

Offline Mr_5lade

  • Jr. Member
  • **
  • Posts: 34
Re: CZ Bren Picture Thread?
« Reply #46 on: February 12, 2020, 08:29:30 PM »
Mr_5lade, that is one gorgeous pistol. I have the 11" now, but I'm definitely considering adding the 8" to my arsenal with my tax refund. Great Photography, as well! I also think you may be a neighbor to me, a few miles North!
The 8” has quickly turned to my favorite blaster. It’s a giggle gun to say the least. Where abouts are you?


Sent from my iPhone using Tapatalk

Offline Mr_5lade

  • Jr. Member
  • **
  • Posts: 34
Re: CZ Bren Picture Thread?
« Reply #47 on: February 13, 2020, 12:01:38 PM »
Here’s mine...






The Wolverine suppressor looks right at home.  Sweet setup!


Sent from my iPhone using Tapatalk

Thanks bro! She’s definitely a looker. I‘m going to be modifying a new gas hole because she’s over gassed suppressed.


Sent from my iPhone using Tapatalk
« Last Edit: April 22, 2020, 05:14:24 PM by Wobbly »

Offline romukom

  • Full Member
  • ***
  • Posts: 350
Re: CZ Bren Picture Thread?
« Reply #48 on: February 26, 2020, 06:50:51 PM »
Here is the latest form of my 805.

« Last Edit: April 22, 2020, 05:11:02 PM by Wobbly, Reason: Mods set photo width to 500 »

Offline Mr_5lade

  • Jr. Member
  • **
  • Posts: 34
Re: CZ Bren Picture Thread?
« Reply #49 on: March 04, 2020, 05:40:39 PM »
Here is the latest form of my 805.



Love the color contrast
« Last Edit: April 22, 2020, 05:11:42 PM by Wobbly, Reason: Mods set photo width to 500 »

Offline romukom

  • Full Member
  • ***
  • Posts: 350
Re: CZ Bren Picture Thread?
« Reply #50 on: March 05, 2020, 12:00:35 AM »
Thanks. I wish that I could take great pictures like the one you posted. My 805 was never intended to be two tone at the beginning. I got inspired when I could not get the acr stock in black.

Offline Mr_5lade

  • Jr. Member
  • **
  • Posts: 34
Re: CZ Bren Picture Thread?
« Reply #51 on: March 05, 2020, 12:12:25 AM »
Thanks. I wish that I could take great pictures like the one you posted. My 805 was never intended to be two tone at the beginning. I got inspired when I could not get the acr stock in black.
Thanks brother. I took about 100 shots and got a few good ones haha. Yeah I definitely dig the two tone. Do you have an Instagram? If you do, add me if you want @mr_5lade


Sent from my iPhone using Tapatalk

Offline PorterN

  • Newbie
  • *
  • Posts: 17
Re: CZ Bren Picture Thread?
« Reply #52 on: March 20, 2020, 08:05:08 PM »
« Last Edit: April 22, 2020, 05:12:09 PM by Wobbly, Reason: Mods set photo width to 500 »

Offline rbuzz00

  • Full Member
  • ***
  • Posts: 168
Re: CZ Bren Picture Thread?
« Reply #53 on: April 01, 2020, 08:11:05 PM »
I got this a few weeks ago, but it has taken a while to gather the parts and finally get it all built. I haven't been able to shoot it yet, but I did take time to shoot a couple of pictures.

To me the size and balance is perfect. With the 11" barrel, it's not too short and it's not too long. It's short enough for close combat usage and still long enough for those longer shots.

CZ Bren 2 Ms 11"
Sig Sauer Romeo 8T
EoTech G33 Magnifier
Dan Haga ACR Adapters
Strong Arm Brace


                                         
                                 
« Last Edit: April 22, 2020, 05:12:56 PM by Wobbly, Reason: Mods set photo width to 500 »

Offline timewaster1700

  • Jr. Member
  • **
  • Posts: 32
Re: CZ Bren Picture Thread?
« Reply #54 on: April 09, 2020, 05:36:30 PM »
This is an awesome thread! I want to see more brens!

Offline wags68

  • Full Member
  • ***
  • Posts: 196
Re: CZ Bren Picture Thread?
« Reply #55 on: April 09, 2020, 06:25:44 PM »
BREN 2S
5.56 NATO, 14" Barrel, 16" with Pinned Dead Air Brake

« Last Edit: April 22, 2020, 05:13:14 PM by Wobbly, Reason: Mods set photo width to 500 »
Cheers,
Dave
----------------------
|  BREN 2s 5.56  |  VZ.58 7.62x39  |  455 Syn SR .22LR |  Scorpion Carbine |  Scorpion Pistol  |  75 Tactical Sports .40S&W / 9mm  |  Shadow 2  |  85 Combat 9mm  |  2075 RAMI  |  P-07  |  P-10C  |  P-10S  |  CZ52 7.62 Tok  |

Offline Prudii

  • Newbie
  • *
  • Posts: 5
Re: CZ Bren Picture Thread?
« Reply #56 on: April 19, 2020, 01:36:44 AM »
My 805, Manticore Arms bottom rail with KNS MLOK side rails and charging handle. The optic is Steiner P4Xi in a ADM recon mount. The ACR stock is with a Dan Haga adapter.

« Last Edit: April 22, 2020, 05:13:31 PM by Wobbly, Reason: Mods set photo width to 500 »

Offline Scorepion

  • Jr. Member
  • **
  • Posts: 43
Re: CZ Bren Picture Thread?
« Reply #57 on: May 14, 2020, 08:36:59 AM »
Bren 2 11" 5.56;

  • Meopta ZD 1-4x22
  • Scalarworks 1.57" mount
  • Green Precision Custom fit CNC throw lever
  • HBI Trigger
  • Magpul ACR
  • Dan Haga Design ACR Adapters
  • Strong Arms Brace


« Last Edit: May 14, 2020, 12:50:01 PM by Scorepion, Reason: fix link »