Author Topic: New P-07  (Read 13886 times)

0 Members and 1 Guest are viewing this topic.

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: New P-07
« Reply #15 on: November 25, 2019, 01:01:14 PM »
Nice light pulls... DA with safety not needed anymore  8)
You should have the same readings with decocker. I didn't find difference with my P-01 Omega.

Super quick swap from de-cocker to safety.
Try opposite   ;D :P O0

Offline sportsnut

  • Jr. Member
  • **
  • Posts: 77
Re: New P-07
« Reply #16 on: November 25, 2019, 01:10:33 PM »

Super quick swap from de-cocker to safety.
Try opposite   ;D :P O0
[/quote]

Lol, no thanks! I do have a special little tool to help with that spring, but I'm not going back..
75 SP-01
75  SP-01 Compact
P-10F/SRO
OD P-07
82
52
24

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: New P-07
« Reply #17 on: November 25, 2019, 01:17:26 PM »
Lol, no thanks! I do have a special little tool to help with that spring, but I'm not going back..

I see you have been well prepared for spring challenge  O0

Enjoy your P-07 ! This's a nice pistol. Not my favorite but we shoot what we like  8)

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1940
Re: New P-07
« Reply #18 on: November 25, 2019, 09:31:57 PM »
 Almost 4 lb single action and almost 10 lb double ?
I think you ought to try this, and change a few Springs.
https://czfirearms.us/index.php?topic=66147.0
Got mine down to 2.8 pound single and 6.5 lb double.👍😃
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1940
Re: New P-07
« Reply #19 on: November 25, 2019, 09:36:12 PM »
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: New P-07
« Reply #20 on: November 26, 2019, 02:47:42 AM »
Almost 4 lb single action and almost 10 lb double ?
[...]
Got mine down to 2.8 pound single and 6.5 lb double.

Trigger pull competition?  8) ::) :P

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 7578
  • I've shot the rest, I now own the best - CZ
Re: New P-07
« Reply #21 on: November 26, 2019, 06:00:49 AM »
My old P07 started off at around 3.5 lbs. SA and 8.5 lbs. DA.  Some uncounted rounds later, 8 years and the installation of CGW reduced power trigger return spring and reduced power firing pin block spring and a small amount of polishing on a couple parts and the last time I checked it was 3&1/4 lbs. SA and I don't remember the DA trigger pull (never use it anyway).

And it seems to shoot better for me than just about everything but the 9MM P09.
I just keep wasting time and money on other brands trying to find/make one shoot like my P07 and P09.  What is wrong with me?

Offline sportsnut

  • Jr. Member
  • **
  • Posts: 77
Re: New P-07
« Reply #22 on: November 26, 2019, 06:52:40 AM »
Also closely check this.
https://czfirearms.us/index.php?topic=101164.0#new



Just checked this out. Looks like I got a good one as the hammer is dead nuts centered and not touching either side.
75 SP-01
75  SP-01 Compact
P-10F/SRO
OD P-07
82
52
24

Offline sportsnut

  • Jr. Member
  • **
  • Posts: 77
Re: New P-07
« Reply #23 on: November 26, 2019, 07:01:49 AM »
Almost 4 lb single action and almost 10 lb double ?
I think you ought to try this, and change a few Springs.
https://czfirearms.us/index.php?topic=66147.0
Got mine down to 2.8 pound single and 6.5 lb double.👍😃



Thank you!
75 SP-01
75  SP-01 Compact
P-10F/SRO
OD P-07
82
52
24

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1940
Re: New P-07
« Reply #24 on: November 26, 2019, 07:09:58 AM »
Concerning the polishing,  something I didn't mention which some of you probably already heard ,
YOU CAN POLISH TO MUCH !!
Only polish, do not try to remove factory machine marks !!!!
I had to replace a couple of parts because my "extra" polishing through the mechanism out of timing. 🤬 It was my luck that Dave at CGW  understood what I had done and had a couple extra parts and sent them to me to correct my over-exuberant polishing.👍
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline sportsnut

  • Jr. Member
  • **
  • Posts: 77
Re: New P-07
« Reply #25 on: November 26, 2019, 07:33:27 AM »
Concerning the polishing,  something I didn't mention which some of you probably already heard ,
YOU CAN POLISH TO MUCH !!
Only polish, do not try to remove factory machine marks !!!!
I had to replace a couple of parts because my "extra" polishing through the mechanism out of timing. 🤬 It was my luck that Dave at CGW  understood what I had done and had a couple extra parts and sent them to me to correct my over-exuberant polishing.👍


Copy that!
75 SP-01
75  SP-01 Compact
P-10F/SRO
OD P-07
82
52
24

Offline Winkel

  • Sr. Member
  • ****
  • Posts: 901
Re: New P-07
« Reply #26 on: November 26, 2019, 07:16:24 PM »
Almost 4 lb single action and almost 10 lb double ?
I think you ought to try this, and change a few Springs.
https://czfirearms.us/index.php?topic=66147.0
Got mine down to 2.8 pound single and 6.5 lb double.👍😃
This is SUCH a good thread.  I read through it again and noticed a couple of things I missed when I originally went through mine.  I'll have to crack it back apart soon!  The big ones for me now, are the back of the trigger bar where it contacts the disconnector and the side of the roller.
Back to the bench!

Offline Jigo23

  • Full Member
  • ***
  • Posts: 397
Re: New P-07
« Reply #27 on: November 26, 2019, 10:39:24 PM »
Congrats!  Love my ODG P-07 with CGW Pro Kit...so much so in fact, that I sold my Wilson Combat EDC X9 and didn’t even think twice about it!  :)

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1940
Re: New P-07
« Reply #28 on: November 27, 2019, 07:16:02 AM »
Congrats!  Love my ODG P-07 with CGW Pro Kit...so much so in fact, that I sold my Wilson Combat EDC X9 and didn’t even think twice about it!  :)
WHY DID YOU SELL THE WILSON ??
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: New P-07
« Reply #29 on: November 27, 2019, 10:26:36 AM »
Congrats!  Love my ODG P-07 with CGW Pro Kit...so much so in fact, that I sold my Wilson Combat EDC X9 and didn’t even think twice about it!  :)
WHY DID YOU SELL THE WILSON ??

 ::) That was my thinking as well...  :-X
EDC X9 is my next pistol.. once my wallet agrees with this purchase   O0