« previous next »
Pages: [1]   Go Down

Author Topic: P-01 OD Green, grip suggestions  (Read 5394 times)

0 Members and 1 Guest are viewing this topic.

Offline nickshawn

  • Full Member
  • ***
  • Posts: 434
P-01 OD Green, grip suggestions
« on: December 12, 2019, 09:37:15 PM »
Picked up an OD green P-01 today and I'm having trouble deciding on grip color choice. I'm fan of the LOK Bogies or aluminum CZ grips but just not sure what color combo would look best so looking for suggestions.

pics are bonus if you have them!
Logged

Offline glock19er

  • Jr. Member
  • **
  • Posts: 71
Re: P-01 OD Green, grip suggestions
« Reply #1 on: December 12, 2019, 09:38:44 PM »
I put these on mine. They have OD in them.

Sent from my SM-N975U1 using Tapatalk

Logged

Offline jpeto

  • Jr. Member
  • **
  • Posts: 76
Re: P-01 OD Green, grip suggestions
« Reply #2 on: December 12, 2019, 09:45:31 PM »



Sent from my iPhone using Tapatalk
Logged

Offline dbarn

  • Sr. Member
  • ****
  • Posts: 573
Re: P-01 OD Green, grip suggestions
« Reply #3 on: December 13, 2019, 11:02:17 AM »
Black thin bogies. Can't go wrong.  8)
Logged

Offline nickshawn

  • Full Member
  • ***
  • Posts: 434
Re: P-01 OD Green, grip suggestions
« Reply #4 on: December 13, 2019, 11:17:22 AM »
glockster - those look good, off Ebay?

jpeto - are those guns OD green? May be my monitor but they look black

dbarn - those are actually my first choice.... but I have a set on my P-06 so wanted change it up bit
 
Logged

Offline SEAKPhotog

  • Full Member
  • ***
  • Posts: 230
Re: P-01 OD Green, grip suggestions
« Reply #5 on: December 13, 2019, 03:24:05 PM »
I put camo Lok grips with an orange liner on my OD green P01.  Looked great but I couldn't get the grips to fit right so I bought some green and brown CoolHand grips from Amazon that also look pretty nice.  They fit very well and the texture is good (but they're made in China if that's an issue). Unfortunately, the Coolhand grips don't come with a palm swell and the "ledge" along the top to use a thumb rest, both which I would have preferred so I eventually ended up putting the stock grips back on.  Go figure.  ::)  I put the camo Lok grips on my PCR, which they fit. I've also got Lok grips on my SP01 and really like them.  The Lok grips (at least the palm swell versions)  have the top "ledge" that can act as a thumb rest. I have VZ grips on my Beretta 92 clone.   They look great but the texture is a bit sharp for my hands (I don't recall which texture I ordered but it wasn't the most aggressive). I can try to dig up image files and post them if you'd like.

Cheers!
Logged

Offline jpeto

  • Jr. Member
  • **
  • Posts: 76
Re: P-01 OD Green, grip suggestions
« Reply #6 on: December 13, 2019, 03:35:11 PM »
Quote from: nickshawn on December 13, 2019, 11:17:22 AM
glockster - those look good, off Ebay?

jpeto - are those guns OD green? May be my monitor but they look black

dbarn - those are actually my first choice.... but I have a set on my P-06 so wanted change it up bit
Top is black, middle is brown black and bottom is OD green


Sent from my iPhone using Tapatalk
Logged

Offline SEAKPhotog

  • Full Member
  • ***
  • Posts: 230
Re: P-01 OD Green, grip suggestions
« Reply #7 on: December 13, 2019, 03:37:04 PM »
Pix of the grips.  The P01 has the Coolhand grips on it. The PCR has the Lok camo grips that I bought for the on the P01.

P01 and SP01 2 by Joe, on Flickr

65274848_2350466171859311_6026942639415230464_n by Joe, on Flickr

P01 and SP01 1 by Joe, on Flickr
Logged

Offline nickshawn

  • Full Member
  • ***
  • Posts: 434
Re: P-01 OD Green, grip suggestions
« Reply #8 on: December 13, 2019, 04:23:02 PM »
Quote from: SEAKPhotog on December 13, 2019, 03:24:05 PM
I put camo Lok grips with an orange liner on my OD green P01.  Looked great but I couldn't get the grips to fit right so I bought some green and brown CoolHand grips from Amazon that also look pretty nice.  They fit very well and the texture is good (but they're made in China if that's an issue). Unfortunately, the Coolhand grips don't come with a palm swell and the "ledge" along the top to use a thumb rest, both which I would have preferred so I eventually ended up putting the stock grips back on.  Go figure.  ::)  I put the camo Lok grips on my PCR, which they fit. I've also got Lok grips on my SP01 and really like them.  The Lok grips (at least the palm swell versions)  have the top "ledge" that can act as a thumb rest. I have VZ grips on my Beretta 92 clone.   They look great but the texture is a bit sharp for my hands (I don't recall which texture I ordered but it wasn't the most aggressive). I can try to dig up image files and post them if you'd like.

Cheers!

Thanks Seak, I think I'm going to try out the LOK camo with the orange liner. Will probably go thin bogies
Logged

Offline SEAKPhotog

  • Full Member
  • ***
  • Posts: 230
Re: P-01 OD Green, grip suggestions
« Reply #9 on: December 13, 2019, 04:55:22 PM »
Quote from: nickshawn on December 13, 2019, 04:23:02 PM
Quote from: SEAKPhotog on December 13, 2019, 03:24:05 PM
I put camo Lok grips with an orange liner on my OD green P01.  Looked great but I couldn't get the grips to fit right so I bought some green and brown CoolHand grips from Amazon that also look pretty nice.  They fit very well and the texture is good (but they're made in China if that's an issue). Unfortunately, the Coolhand grips don't come with a palm swell and the "ledge" along the top to use a thumb rest, both which I would have preferred so I eventually ended up putting the stock grips back on.  Go figure.  ::)  I put the camo Lok grips on my PCR, which they fit. I've also got Lok grips on my SP01 and really like them.  The Lok grips (at least the palm swell versions)  have the top "ledge" that can act as a thumb rest. I have VZ grips on my Beretta 92 clone.   They look great but the texture is a bit sharp for my hands (I don't recall which texture I ordered but it wasn't the most aggressive). I can try to dig up image files and post them if you'd like.

Cheers!

Nice!  Hope you like 'em!  And I hope they fit!

Thanks Seak, I think I'm going to try out the LOK camo with the orange liner. Will probably go thin bogies
Logged

Offline nickshawn

  • Full Member
  • ***
  • Posts: 434
Re: P-01 OD Green, grip suggestions
« Reply #10 on: December 14, 2019, 12:54:38 PM »
Just ordered! Will post pics in a week or so...
Logged

Offline glock19er

  • Jr. Member
  • **
  • Posts: 71
Re: P-01 OD Green, grip suggestions
« Reply #11 on: December 14, 2019, 05:41:21 PM »
Quote from: nickshawn on December 13, 2019, 11:17:22 AM
glockster - those look good, off Ebay?

jpeto - are those guns OD green? May be my monitor but they look black

dbarn - those are actually my first choice.... but I have a set on my P-06 so wanted change it up bit
Got them from Amazon.

Sent from my SM-N975U1 using Tapatalk

Logged

Offline nickshawn

  • Full Member
  • ***
  • Posts: 434
Re: P-01 OD Green, grip suggestions
« Reply #12 on: December 23, 2019, 08:19:07 PM »
Got them today, look great and fit perfect




Sent from my iPhone using Tapatalk
Logged

Offline Indy_Tim

  • Sr. Member
  • ****
  • Posts: 884
Re: P-01 OD Green, grip suggestions
« Reply #13 on: December 24, 2019, 08:20:00 AM »
Nice choice!  When I had my OD P01, I ran VZ frags on them.  Cool Hand snakes looked good to but I don’t have a photo of those.

Logged

Offline SEAKPhotog

  • Full Member
  • ***
  • Posts: 230
Re: P-01 OD Green, grip suggestions
« Reply #14 on: December 26, 2019, 06:19:22 PM »
 Sweet!  Glad they fit.  They look great!

Quote from: nickshawn on December 23, 2019, 08:19:07 PM
Got them today, look great and fit perfect




Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »