Could somebody show me(with pictures)...

[Miamitiger]

  Could somebody show me(with pictures)how to polish the parts that you need to polish in order to improve the trigger in the CZ 75 B omega?

[BStill]

there are several videos on youtube.  and some posts in the gunsmithing sub-forum.  I've been researching it but haven't made the attempt yet.

Sent from my LM-G710 using Tapatalk

[anonymouscuban]

Here you. Best tutorial that I've come across.  I would suggest you read through the follow up posts with questions and answers.

https://forums.brianenos.com/topic/191773-cz-tuning-101-with-professor-atlas/

Sent from my SM-G930U using Tapatalk

[Tok36]

Here you. Best tutorial that I've come across.  I would suggest you read through the follow up posts with questions and answers.

https://forums.brianenos.com/topic/191773-cz-tuning-101-with-professor-atlas/

Sent from my SM-G930U using Tapatalk

^^A good guide but it is for the classic CZ 75 trigger system. OP is asking about the Omega trigger system.

This is a good one for the Omega trigger system. Though this is specifically for the P-Series a CZ 75 Omega has almost the same frame parts.

How to Tune, Smooth and Upgrade the P-07/P-09
https://czfirearms.us/index.php?topic=66147.0

[DOC 1500]

If you're polishing using a Dremel do not remove " any machine marks " just polish to a shiny finish any metal to metal contact points. You're not trying to remove any metal you're just trying to make it shiny.
Do not and I repeat do not try to polish The Sear hooks or the hammer hooks, unless you know what you're doing.
Good luck