Author Topic: Tristar / canik p100/120 frame widths  (Read 430 times)

0 Members and 1 Guest are viewing this topic.

Offline Jrtatonka

  • Newbie
  • *
  • Posts: 15
Tristar / canik p100/120 frame widths
« on: December 22, 2019, 06:56:35 AM »
Does anybody know, or have a micrometer / caliper and can measure the width of the frames? It looks like the clones don't have that step in the frame directly above the grips.
Thanks

Offline legionofdoon

  • Full Member
  • ***
  • Posts: 150
Re: Tristar / canik p100/120 frame widths
« Reply #1 on: December 22, 2019, 11:00:54 AM »
I don't have a micrometer but I'm looking at my P100 now and there is a step or cut where the beaver tail is directly above the grip at the rear of the gun where the hammer pivot pin is. It looks 1/8 on either side per measuring tape.

Sent from my Moto G (4) using Tapatalk


Offline legionofdoon

  • Full Member
  • ***
  • Posts: 150
Re: Tristar / canik p100/120 frame widths
« Reply #2 on: December 22, 2019, 11:03:09 AM »
Its dusty I know.

Sent from my Moto G (4) using Tapatalk


Offline Practical Shooter

  • Full Member
  • ***
  • Posts: 475
  • Legio Patria Nostra
Re: Tristar / canik p100/120 frame widths
« Reply #3 on: December 22, 2019, 03:18:31 PM »
Does anybody know, or have a micrometer / caliper and can measure the width of the frames? It looks like the clones don't have that step in the frame directly above the grips.
Thanks

I have a P120 and a micrometer, but I am not too sure where you want the measurement to be taken.

Offline legionofdoon

  • Full Member
  • ***
  • Posts: 150
Re: Tristar / canik p100/120 frame widths
« Reply #4 on: December 22, 2019, 03:37:20 PM »
What do you need the info for? If it's for a specific reason just ask that reason and I'm sure you will get a better answer. BTW mine is one of the earlier P100s it's serial number is between 1 and 5 so I'm not sure if they changed anything since then.

Sent from my Moto G (4) using Tapatalk


Offline Jrtatonka

  • Newbie
  • *
  • Posts: 15
Re: Tristar / canik p100/120 frame widths
« Reply #5 on: December 22, 2019, 04:53:21 PM »
If you look at a p01 there is a step directly above the grips.  They made the frame thicker. Im curious if the clones are the thickness of the original 75 or sp01 series

Offline legionofdoon

  • Full Member
  • ***
  • Posts: 150
Re: Tristar / canik p100/120 frame widths
« Reply #6 on: December 22, 2019, 04:59:42 PM »
There is no outward step on my P100. It had a cut out as per my pic otherwise it's smooth from the grip to the slide. At least on mine.

Sent from my Moto G (4) using Tapatalk


Offline legionofdoon

  • Full Member
  • ***
  • Posts: 150
Re: Tristar / canik p100/120 frame widths
« Reply #7 on: December 22, 2019, 05:01:44 PM »
That being said I use a stealth gear AWIB for the P01 and it fits perfectly.

Sent from my Moto G (4) using Tapatalk


Offline Practical Shooter

  • Full Member
  • ***
  • Posts: 475
  • Legio Patria Nostra
Re: Tristar / canik p100/120 frame widths
« Reply #8 on: December 23, 2019, 08:54:59 AM »
I have 26.06mm or 1.026"
Good luck