Taran Tactical +4 Base Plates On CZ 75 SP-01 Tactical?

[Irontoro]

I am on the verge of buying some extended +4 Mec-Gar base plates for a CZ 75 SP-01 Tactical from Taran Tactical since they are currently doing a 30% discount. I heard on throughout the the internet that the lanyard loop on the SP-01 tactical interferes with the base plates. Has anyone else experienced this? If so, how did you fix the lanyard loop blocking base plates?

[anonymouscuban]

Can't tell you if you're correct but if the lanyard loop is the issue, just replace it with this.

https://cajungunworks.com/product/22-hammer-spring-plug-flat/

Sent from my SM-G930U using Tapatalk

[Irontoro]

Thanks for the response! I'll check that out.

[Gducoing]

Could also just grind the lanyard loop down.

Sent from my SM-N950U using Tapatalk

[Raining_Brass]

Looks like it would be close. At 30% off I'm going to pick up 4 for my Phantom. Worst case I'll grind the lanyard loop flush and cerakote it black.
Edit: It says for mec gar mags. I assume they will work on the 18 round OEM SP-01 mags as well? I know OEM mags are made by mec gar, just want to make sure nothing is different about them as far as attaching the extensions.

[SEAKPhotog]

I am on the verge of buying some extended +4 Mec-Gar base plates for a CZ 75 SP-01 Tactical from Taran Tactical since they are currently doing a 30% discount. I heard on throughout the the internet that the lanyard loop on the SP-01 tactical interferes with the base plates. Has anyone else experienced this? If so, how did you fix the lanyard loop blocking base plates?

Yep, def interferes.  I replaced mine with a flat plug. Grinding is another option but I just think the flat plug looks better and you're left with the original ring if you later want to install it (or sell the gun with it's original parts).

[Irontoro]

Looks like it would be close. At 30% off I'm going to pick up 4 for my Phantom. Worst case I'll grind the lanyard loop flush and cerakote it black.
Edit: It says for mec gar mags. I assume they will work on the 18 round OEM SP-01 mags as well? I know OEM mags are made by mec gar, just want to make sure nothing is different about them as far as attaching the extensions.

I think you do have to buy the Mec-Gar branded magazines. I know that the factory OEM are technically Mec-Gar, but I think you need to buy the Mec-Gar Specific ones.


Sent from my iPhone using Tapatalk

[Raining_Brass]

Looks like it would be close. At 30% off I'm going to pick up 4 for my Phantom. Worst case I'll grind the lanyard loop flush and cerakote it black.
Edit: It says for mec gar mags. I assume they will work on the 18 round OEM SP-01 mags as well? I know OEM mags are made by mec gar, just want to make sure nothing is different about them as far as attaching the extensions.

I think you do have to buy the Mec-Gar branded magazines. I know that the factory OEM are technically Mec-Gar, but I think you need to buy the Mec-Gar Specific ones.

Lame. I'm not interested in that case. All my mags are OEM CZ 18 rounders. Not gonna buy different ones for the sake of base pads.

[2morechains]

The TTI+4 extensions are designed to work with the 17 rnd MecGar mags in order to fit the USPSA mag length gauge.  With Grams springs and followers I get 23 rnds of 9mm in the mag. 

The TTI+4 extensions WILL work on the 18 rnd CZ stock mags, however it’s too long (by 1/8”) to fit the 141.25mm mag gauge. 

There will be a gap between the top of the extension and the bottom of the mag well.  With the 17 rnd MecGars there isn’t a gap. 

[Raining_Brass]

The TTI+4 extensions are designed to work with the 17 rnd MecGar mags in order to fit the USPSA mag length gauge.  With Grams springs and followers I get 23 rnds of 9mm in the mag. 

The TTI+4 extensions WILL work on the 18 rnd CZ stock mags, however it’s too long (by 1/8”) to fit the 141.25mm mag gauge. 

There will be a gap between the top of the extension and the bottom of the mag well.  With the 17 rnd MecGars there isn’t a gap.

Nice to know! Phantom isn't a competition gun for me, so it doesn't really matter that it won't be legal.

[Raining_Brass]

Lol, I just saw the coupon expired yesterday for 30% off.

Guess I was too late.

[Mercs]

Lol, I just saw the coupon expired yesterday for 30% off.

Guess I was too late.

Now you can just get some Hennings which are better anyways [emoji3]


Sent from my iPhone using Tapatalk

[Raining_Brass]

Lol, I just saw the coupon expired yesterday for 30% off.

Guess I was too late.

Now you can just get some Hennings which are better anyways [emoji3]


Sent from my iPhone using Tapatalk

I was really only intrigued when they were 30% off. Another 4 rounds isn't worth $40+ a base pad for me for a non competition gun.

[Mercs]

Lol, I just saw the coupon expired yesterday for 30% off.

Guess I was too late.

Now you can just get some Hennings which are better anyways [emoji3]


Sent from my iPhone using Tapatalk

I was really only intrigued when they were 30% off. Another 4 rounds isn't worth $40+ a base pad for me for a non competition gun.

Ya I hear ya, I was lured in by the 25% off sale at CZ-USA and picked up a few for $30 along with the TSO rear sight I fitted to my Stock 1


Sent from my iPhone using Tapatalk

[Ironhand]

Hang in there.  They usually have a few sales throughout the year.  I have a bunch of their base pads on several pistols and one of my AR pistols runs on one of their lowers.  Top quality stuff from a great vendor.