Author Topic: Bren S2 tail plate movement  (Read 359 times)

0 Members and 1 Guest are viewing this topic.

Offline TorpedoARMED

  • Newbie
  • *
  • Posts: 2
Bren S2 tail plate movement
« on: January 08, 2020, 09:39:33 PM »
Greetings, I am a new Bren S2 owner with a question.

The tail plate which I have installed and extension tube and brace has some wiggle in it, all though it is a small amount, the effect on the brace is very evident.

Could some Bren S2 owners chim in if they have slop in the tail plate.

TIA

Offline N_Parker

  • Newbie
  • *
  • Posts: 22
Re: Bren S2 tail plate movement
« Reply #1 on: January 08, 2020, 11:50:48 PM »
Yep, same here.  Interface to receiver is a tad sloppy.

Offline TorpedoARMED

  • Newbie
  • *
  • Posts: 2
Re: Bren S2 tail plate movement
« Reply #2 on: January 09, 2020, 01:43:56 PM »
Once you add a AR extension tube and brace, it is worse than an Egyptian made AKM folder. And that's BAD.

Same such a small detail really could taint the opinion of many who would be interested in the platform

Offline Aries144

  • Jr. Member
  • **
  • Posts: 70
Re: Bren S2 tail plate movement
« Reply #3 on: January 10, 2020, 03:28:34 PM »
Same here. You can snug it up with tape or etc.

If you ever convert it to a rifle or SBR, it looks like the proper folding carbon fiber stock fits snug.

Offline Magsz

  • Full Member
  • ***
  • Posts: 208
Re: Bren S2 tail plate movement
« Reply #4 on: January 11, 2020, 03:12:15 PM »
Mine is also horrific.

Its a HUGE detractor and really sloppy on CZ's part.

To say im disappointed is an understatement but I hope my disappointment is alleviated by the way this thing shoots.  I have yet to fire it but people say its fantastic.  I also hold out hope that my disappointment will be tempered by other, aftermarket stock/brace/CZ options.  Im not going to have an AR buffer tube on this thing forever.

Offline N_Parker

  • Newbie
  • *
  • Posts: 22
Re: Bren S2 tail plate movement
« Reply #5 on: January 13, 2020, 06:23:27 PM »

If you ever convert it to a rifle or SBR, it looks like the proper folding carbon fiber stock fits snug.

I will be SBRing mine and I am assuming/hoping the factory stocks will fit snug.

Offline Mr_5lade

  • Newbie
  • *
  • Posts: 8
Re: Bren S2 tail plate movement
« Reply #6 on: January 14, 2020, 10:32:53 PM »
I’m also disappointed with the play in mine. It makes the firearm feel cheap. I’ve got an ar buffer tube attached to it... I’m hoping CZ comes out with a new adapter to fix this. I’m the meantime I’ve been looking intto ordering one of Dan Haga’s picatinny rail plates.

 

anything