P-09 trigger

[alcante262]

Can the P-09 da/sa be improved.Can the DA pull be as good as the S/A.With Cajun parts or with Cajun doing the work themselves.

[jurek]

Remember - DA will never be as good as SA.
Fast and not expensive improvement:
CGW #15 hammer spring
CGW Roller Bearing
CGW Reduced Power Trigger Return Spring

These should be enough to have better SA pull and smooth lighter DA.
All these can be replaced at home.

[alcante262]

My CZ P09 has the Disconnector removed.Is that going to cause any problems.Thanks

[jurek]

My CZ P09 has the Disconnector removed.Is that going to cause any problems.Thanks

Does it still shoot in DA and SA?

[alcante262]

Yes both DA/SA.I just liked the idea of cocked and locked.

[jurek]

Yes both DA/SA.I just liked the idea of cocked and locked.

I'm just wondering how does it still shoot normally without disconnector...
Check your trigger reset if it's still normal.

I played with disconnector last year and ended up with full auto  . I came back to factory one after that experience 

[DOC 1500]

Follow the how to tune section just above your post.

[Winkel]

And with the reduced power hammer spring, some will recommend the extended firing pin.  Also, as long as you're in there polishing things up, don't forget to polish the hammer strut.  They can be a little rough on the stem on which the spring rides.  It it's the usual stamped piece, this will smooth thing up a little for you.