Author Topic: SP-01 Phantom help  (Read 892 times)

0 Members and 1 Guest are viewing this topic.

Offline THarbison

  • Jr. Member
  • **
  • Posts: 43
SP-01 Phantom help
« on: September 26, 2020, 03:19:08 PM »
I have a canonized phantom and am for the most part very happy. Any tricks to cleaning up the little duck bill and spring that lifts the trigger bar on a phantom? Mine is pretty gritty feeling.

Sent from my SM-N950U using Tapatalk


Offline AZ_CZ

  • Hero Member
  • *****
  • Posts: 3245
Re: SP-01 Phantom help
« Reply #1 on: September 26, 2020, 03:32:22 PM »
I have a canonized phantom and am for the most part very happy.

I want to offer my congratulations on one of the best spell-check errors I’ve seen. I too feel like some of my CZ should be bestowed this appellation after fitting CZC or CGW parts.


I usually polish the lifter arm and the firing pin block when doing an upgrade. There’s a good sticky in the gunsmithing Section.
CZ Fanbot since 1996

Offline THarbison

  • Jr. Member
  • **
  • Posts: 43
Re: SP-01 Phantom help
« Reply #2 on: September 26, 2020, 04:04:18 PM »
Lol. Gotta love auto correct.

Sent from my SM-N950U using Tapatalk


Offline THarbison

  • Jr. Member
  • **
  • Posts: 43
Re: SP-01 Phantom help
« Reply #3 on: September 26, 2020, 04:09:03 PM »
Unfortunately the phantom has the parts circled in the picture that aren't in to many of the other CZ pistols. I believe the only other is the polymer Rami. Those parts are the source of my crunchiness.

Sent from my SM-N950U using Tapatalk