Author Topic: Ejector/Sear Cage for CZ85 Combat  (Read 2066 times)

0 Members and 1 Guest are viewing this topic.

Offline grumpyoldman

  • Newbie
  • *
  • Posts: 6
Ejector/Sear Cage for CZ85 Combat
« on: December 12, 2018, 11:10:14 AM »
In a previous post it looks like the slide stop is the only thing different on the 85 Combat. So a SP01/Shadow1/Shadow 2 ejector/sear cage should fit correct.

Thanks,
« Last Edit: December 12, 2018, 12:50:04 PM by grumpyoldman, Reason: clarification »

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 6192
  • I've shot the rest, I now own the best - CZ
Re: Ejector for CZ85 Combat
« Reply #1 on: December 12, 2018, 12:32:36 PM »
The ejector is made into the sear cage, right?  On my CZ75 types it is.  I believe there are different sear cages.  I've see them with different numbers stamped into them.  I don't believe I've ever read exactly why they are different.
I stopped carrying the SIG 556R.  SIG changed models and couple/three times and stopped supporting it with parts.  So, I stopped supporting SIG.  Back to the tried/true AR15 Carbine.

Offline grumpyoldman

  • Newbie
  • *
  • Posts: 6
Re: Ejector/Sear Cage for CZ85 Combat
« Reply #2 on: December 12, 2018, 12:52:35 PM »
Yes the ejector/sear cage are integral. I have since corrected my original post. I know they make a different ejector sear cage for the TS but the SP01/Shadow 1 & 2 are the same part. Just thinking this one will fit the 85 Combat but just want some clarification for anyone who may have experienced this change?

Offline painter

  • Hero Member
  • *****
  • Posts: 6203
Re: Ejector/Sear Cage for CZ85 Combat
« Reply #3 on: December 13, 2018, 08:36:16 AM »
I believe all the ambi safety 75 series guns use the same ejector/sear cage.
I had the right to remain silent...

but not the ability.

Offline CZFanGrrrl

  • Newbie
  • *
  • Posts: 3
Re: Ejector/Sear Cage for CZ85 Combat
« Reply #4 on: May 18, 2021, 03:03:06 PM »
I recently rebuilt a friend’s 85C.  The hammer (worn down hooks) and the safety (the lobe of which had been incorrectly filed by someone else trying to do a trigger job on it) were malfunctioning.  Trying to get a replacement safety was an issue, it would have taken about 6 months to get a replacement.  What I did was replace the hammer with a new comp hammer and replaced the ejector/sear with one from one of my Shadow 2’s and then used the safety control off of the Shadow 2 as the safety from the 85C only works with the 85C ejector and the 85C ejector doesn’t work with the Shadow 2 safety. 

Offline Mark-combat

  • Jr. Member
  • **
  • Posts: 33
Re: Ejector/Sear Cage for CZ85 Combat
« Reply #5 on: May 19, 2021, 07:24:24 AM »
very nice job

Offline Tok36

  • Hero Member
  • *****
  • Posts: 5980
Re: Ejector/Sear Cage for CZ85 Combat
« Reply #6 on: May 19, 2021, 05:41:09 PM »
   There are two main types of Sear Cage/Safety Levers for the CZ 75 variant safety models. The Spindle Style and the D Style. This is because different CZ safety models use different safety lever interface designs. For clarity, when i say safety interface, i am talking about how the left and right side safety levers lock together and work as one part.

The CZ SP-01, SP-01 Shadow and variants use a D style safety lever interface and a D style Sear Cage.

The CZ 75 SA, 75 Stainless, CZ 85 B and 85 Combat use a Spindle style safety interface and a Spindle style sear cage.

Though you can use ether style in any of the listed models, the safety interface style must match the Sear Cage.

There are a few more safety lever options for the D style sear cage, this is why some folks choose to change out the sear cage to a D style so that they can make use of the added options.
« Last Edit: May 20, 2021, 02:32:40 PM by Tok36, Reason: Spelling. »
Will work for CZ pics! (including but not limited to all CZ clones)