Author Topic: CZC Semi Compact .40 S&W questions  (Read 653 times)

0 Members and 1 Guest are viewing this topic.

Offline A.

  • Jr. Member
  • **
  • Posts: 38
CZC Semi Compact .40 S&W questions
« on: September 19, 2020, 04:08:45 PM »

I  am a lucky new owner of CZC Semi Compact  .40 S&W single action, CZC model number 91709. Here are my questions:
1. Can I use the slide from my CZ compact 9mm on this frame? P-01 9mm slide?
2. Can 9mm SP-01 barrel be fit to this slide, by cutting one top lug and shortening it? Would  .40 extractor works ok for 9mm? What would be other 9mm alternative?
3. Can .357 Sig barrel be ordered?

Thank you very much.



« Last Edit: September 19, 2020, 04:13:10 PM by A. »

Offline nickshawn

  • Full Member
  • ***
  • Posts: 442
Re: CZC Semi Compact .40 S&W questions
« Reply #1 on: September 20, 2020, 10:05:51 PM »
I can't answer #1 and 2, but the answer to #3 is yes.


Offline Stuart

  • Moderator
  • Hero Member
  • *****
  • Posts: 8458
Re: CZC Semi Compact .40 S&W questions
« Reply #2 on: September 21, 2020, 12:30:31 AM »
Yes


Yes



Yes

👍
stuart@czcustom.com
czcustom.com

Offline A.

  • Jr. Member
  • **
  • Posts: 38
Re: CZC Semi Compact .40 S&W questions
« Reply #3 on: September 21, 2020, 09:23:38 AM »
Thank you!!!!
Will be in touch to order .357 Sig barrel, my favorite caliber.

Offline Stuart

  • Moderator
  • Hero Member
  • *****
  • Posts: 8458
Re: CZC Semi Compact .40 S&W questions
« Reply #4 on: September 21, 2020, 10:24:31 AM »
Thank you!!!!
Will be in touch to order .357 Sig barrel, my favorite caliber.

What will be needed is an SP01 barrel.
Will need to be modified for compact pistol, rechambered to .357sig, shortened if you want.

stuart@czcustom.com
czcustom.com

Offline Assnolax

  • Newbie
  • *
  • Posts: 7
Re: CZC Semi Compact .40 S&W questions
« Reply #5 on: October 12, 2020, 05:16:19 PM »
Did your slide need to be modified to clear the dust cover on the single action frame? I have a compact 40 with rail and the portion of the slide housing the recoil spring is too meaty to clear my SA frame or SP01 frame.

Offline Hammer Time

  • Sr. Member
  • ****
  • Posts: 660
Re: CZC Semi Compact .40 S&W questions
« Reply #6 on: October 12, 2020, 05:29:04 PM »
All I can offer is congrats! I'd love to have a 75 Compact in .40 S&W!

Offline A.

  • Jr. Member
  • **
  • Posts: 38
Re: CZC Semi Compact .40 S&W questions
« Reply #7 on: October 14, 2020, 08:30:28 AM »
Did your slide need to be modified to clear the dust cover on the single action frame? I have a compact 40 with rail and the portion of the slide housing the recoil spring is too meaty to clear my SA frame or SP01 frame.

It does not look to be modified in any way. Of note, another 9mm compact slide fits just fine.

Offline Assnolax

  • Newbie
  • *
  • Posts: 7
Re: CZC Semi Compact .40 S&W questions
« Reply #8 on: October 14, 2020, 10:28:26 AM »
Interesting, thank you.  My 40 compact slide is 20 thousandths wider on each side of the recoil spring housing/channel than any other slide I have.  Off the top of my head I think its .685 for the 40 compact slide width vs .645 for pretty much everything I have.

Offline A.

  • Jr. Member
  • **
  • Posts: 38
Re: CZC Semi Compact .40 S&W questions
« Reply #9 on: October 14, 2020, 05:26:41 PM »
Interesting, thank you.  My 40 compact slide is 20 thousandths wider on each side of the recoil spring housing/channel than any other slide I have.  Off the top of my head I think its .685 for the 40 compact slide width vs .645 for pretty much everything I have.
Yes, mine measures .686, it fits P-01 frame just fine.

Offline BarkingAnt

  • Jr. Member
  • **
  • Posts: 51
Re: CZC Semi Compact .40 S&W questions
« Reply #10 on: October 14, 2020, 05:37:18 PM »
All I can offer is congrats! I'd love to have a 75 Compact in .40 S&W!

Ditto, ditto, ditto...sigh

 

anything