Author Topic: muzzle brake  (Read 393 times)

0 Members and 1 Guest are viewing this topic.

Offline Dinola

  • Newbie
  • *
  • Posts: 4
muzzle brake
« on: November 15, 2020, 04:44:49 PM »
Hi.. new to the forum and this particular rifle, the 457 in an At One stock.  Honestly , while I knew they were fun (have a 10-22)  I just didn't realize that 22's could be so very accurate.
At any rate, I've purchased a few things from DIP.. fine service but their muzzle brake is out of stock for a bit and this rifle really does BEG for something at the end.  For me a brake seems totally unnecessary but I'm not going for a silencer and dont know what else to put there for aesthetics..
Suggestions?  I cant find anything in a general google search, i'm not sure if some generic thing is gonna work. 
Thanks for any guidance.

Online Peashooter67

  • Newbie
  • *
  • Posts: 16
muzzle brake
« Reply #1 on: November 15, 2020, 06:27:09 PM »
There are a lot of fancy add ons on eBay , sir...

Welcome to the ward as well !


Here is one of many examples

Extra long muzzle brake

https://www.ebay.com/itm/4-5-Extra-Long-Linear-Compensator-Muzzle-Brake-1-2x28-TPI-for-9mm-/224170306185?_trksid=p2349624.m46890.l49292

Fake suppressor

https://www.ebay.com/itm/Faux-Suppressor-20-6-1-2-x-28-TPI-/184029799049?_trksid=p2349624.m46890.l49292

All kinds of muzzle brakes of every conceivable shape and design
Sent from my iPhone using Tapatalk
« Last Edit: November 15, 2020, 06:35:32 PM by Peashooter67 »

Offline Dinola

  • Newbie
  • *
  • Posts: 4
Re: muzzle brake
« Reply #2 on: November 16, 2020, 03:17:04 AM »
Thank you !  but wait wait..
so.. what you are saying is that anything that is 1/2 x 28 and has a bigger bore than .22 will be ok? 
Does some part of this thing need to match the barrel outside diameter?

I really dont know anything about this stuff --  I come from an era where the only people screwing things on the end of a gun was the Man From UNCLE...  and a couple of mafia guys. 
Thanks again!

Online Peashooter67

  • Newbie
  • *
  • Posts: 16
Re: muzzle brake
« Reply #3 on: November 16, 2020, 11:27:44 PM »
As long as the threads match then yes.
As for the diameter matching, that is up to you.


Sent from my iPhone using Tapatalk

Offline Dinola

  • Newbie
  • *
  • Posts: 4
Re: muzzle brake
« Reply #4 on: November 17, 2020, 09:56:14 PM »
gotcha, thanks!

 

anything