Author Topic: Sp01 recoil spring  (Read 919 times)

0 Members and 1 Guest are viewing this topic.

Offline Lock-n-load

  • Hero Member
  • *****
  • Posts: 1384
Sp01 recoil spring
« on: November 26, 2020, 09:21:11 PM »
Shooting factory s&b 124 gr. range  ammo in cz sp01 tactical .13 lb main spring and lighter fireing pin and plunger springs and lighter trigger return spring .is there any advantage to putting in a 11 lb recoil spring or is that only if you are useing reduced power ammo and will damage your slide. ... been reading conflicting ideas about this. Range only pistol.

Offline timmy75

  • Full Member
  • ***
  • Posts: 440
Re: Sp01 recoil spring
« Reply #1 on: November 27, 2020, 03:23:50 AM »

Offline Lock-n-load

  • Hero Member
  • *****
  • Posts: 1384
Re: Sp01 recoil spring
« Reply #2 on: November 27, 2020, 01:03:27 PM »
you can try to study this:

https://cajungunworks.com/how-to-select-the-proper-recoil-spring/


This is what I read and thought I should remove the 11lb and go back to stock since I’m not useing lower power ammo. That’s why I was asking.