Author Topic: 97B extended safety from CGW doesn’t look right  (Read 1134 times)

0 Members and 1 Guest are viewing this topic.

Offline RBRK

  • Newbie
  • *
  • Posts: 12
97B extended safety from CGW doesn’t look right
« on: January 01, 2021, 09:04:36 AM »
[/url]
[/img]
This is their modified lever, they modify it for the 97. it doesn’t fit close to the frame. I’ve seen others CGW 97 that they are flush.. am I missing something? It’s in as far as it will go. Not modified correctly for the 97? This looks like crap.

Offline RBRK

  • Newbie
  • *
  • Posts: 12
Re: 97B extended safety from CGW doesn’t look right
« Reply #1 on: January 01, 2021, 09:25:28 AM »
No it’s in the groove. It just looks like it’s not right for this gun look at this picture. The part past the lever is too thick. https://i.imgur.com/sPEBLowl.jpg[/img]]

Offline RBRK

  • Newbie
  • *
  • Posts: 12
Re: 97B extended safety from CGW doesn’t look right
« Reply #2 on: January 01, 2021, 09:28:52 AM »
I will call Cajun Monday I don’t see this fitting flush no matter what.

Offline Bowenbuilt

  • Jr. Member
  • **
  • Posts: 30
Re: 97B extended safety from CGW doesn’t look right
« Reply #3 on: January 20, 2021, 10:18:39 PM »
Looks like you need to pull the safety detent and spring back to let the safety fully seat into the frame.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 5841
Re: 97B extended safety from CGW doesn’t look right
« Reply #4 on: January 21, 2021, 12:21:38 AM »
I will call Cajun Monday I don’t see this fitting flush no matter what.

I would email them the pics. Worth a thousands words as they say.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Lock-n-load

  • Full Member
  • ***
  • Posts: 347
Re: 97B extended safety from CGW doesn’t look right
« Reply #5 on: January 21, 2021, 08:06:52 PM »
Looks like you need to pull the safety detent and spring back to let the safety fully seat into the frame.

Had same problem on my spo1 tatical ,moved the decocker lever up and it went right in!

Offline Ebrawl86

  • Newbie
  • *
  • Posts: 1
Re: 97B extended safety from CGW doesn’t look right
« Reply #6 on: February 05, 2021, 06:32:52 PM »
I was looking to purchase when back in stock. Was there a resolution?

Offline RBRK

  • Newbie
  • *
  • Posts: 12
Re: 97B extended safety from CGW doesn’t look right
« Reply #7 on: February 09, 2021, 09:37:14 PM »
I returned it, I don’t see it fitting tight against the frame. Maybe someone can make it work , but it did drop in and function fine, I didn’t like the way the lever stuck out vs the stock lever. I called Cajun and the guy there wasn’t  too helpful, I get that it’s more of a thing he would have to see to comment on my issue, I didn’t want to waste any more time on it.

Offline tdogg

  • Hero Member
  • *****
  • Posts: 1749
Re: 97B extended safety from CGW doesn’t look right
« Reply #8 on: February 17, 2021, 11:26:17 AM »
Looks like you need to pull the safety detent and spring back to let the safety fully seat into the frame.

This!

The safety will hang up just before fully seating.  The safety detent needs to be pulled back to allow the safety to fully seat flush.

Cheers,
Toby
This forum rocks!

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 6052
  • I've shot the rest, I now own the best - CZ
Re: 97B extended safety from CGW doesn’t look right
« Reply #9 on: February 17, 2021, 02:06:29 PM »
Yeah, gotta use a little pick, or small jeweler's screwdriver blade to push that detent to the rear far enough to let the inside enlarged section of the shaft slide past it so it can pop back forward into the center groove and hold the safety in place.  Just like the CZ75Bs (or even the CZ85s and CZ85Bs.

Patience, observation, going slow and asking questions can make things easier.
I stopped carrying the SIG 556R.  SIG changed models and couple/three times and stopped supporting it with parts.  So, I stopped supporting SIG.  Back to the tried/true AR15 Carbine.