Author Topic: Did Lil tune up on my CZ  (Read 281 times)

0 Members and 1 Guest are viewing this topic.

Offline arthurstearl

  • Full Member
  • ***
  • Posts: 135
Did Lil tune up on my CZ
« on: January 12, 2021, 09:21:25 AM »
When I took the action off the Stock the action screws were barely in the gun. I twisted them out with my fingers five star tool. Did the tune up the needed to be done turned out great put the stock back on the gun bolt would not open. Action screws are too long had to file them down still not where they need to be going slow so I won't take too much. You think that address issues like that at the factory

Sent from my LM-X210APM using Tapatalk


Offline BubbaLa

  • Jr. Member
  • **
  • Posts: 66
Re: Did Lil tune up on my CZ
« Reply #1 on: January 12, 2021, 05:59:07 PM »
Variations in the stock,which is not uncommon,would cause the screw to protrude and interfere with the action of the bolt.
No big deal really.
NRA CERTIFIED METALLIC CARTRIDGE RELOADING and PISTOL INSTRUCTOR

NRA SAFETY RANGE OFFICER

Offline hardmix

  • Newbie
  • *
  • Posts: 10
Re: Did Lil tune up on my CZ
« Reply #2 on: January 18, 2021, 07:44:00 PM »
Quality control should be better than that.

 

anything