Author Topic: Slide Stop Compatibility  (Read 677 times)

0 Members and 1 Guest are viewing this topic.

Offline Hox013

  • Jr. Member
  • **
  • Posts: 27
Slide Stop Compatibility
« on: February 25, 2021, 02:12:19 AM »
I have a P01 Omega, P01, and SP01 Tactical. I would like to try the thin slide stop, labeled as Rami/Shadow 2, for all of them. Are the slide stops the same for all of these? If no, can they be fitted? If so, what needs done to fit them?

Thanks in advance.

Offline tdogg

  • Hero Member
  • *****
  • Posts: 2632
  • Two Alpha!
Re: Slide Stop Compatibility
« Reply #1 on: February 25, 2021, 11:48:28 AM »
I'm not sure on the omega but the rest should fit and function.  You should make sure the slide lock nub doesn't contact the nose of the top bullet in the magazine when feeding. Simply strip the slide from the gun and insert a loaded magazine with the slide stop in place check to see if it will clear.

Cheers,
Toby
This forum rocks!

Offline Hox013

  • Jr. Member
  • **
  • Posts: 27
Re: Slide Stop Compatibility
« Reply #2 on: February 25, 2021, 01:34:56 PM »
I'm not sure on the omega but the rest should fit and function.  You should make sure the slide lock nub doesn't contact the nose of the top bullet in the magazine when feeding. Simply strip the slide from the gun and insert a loaded magazine with the slide stop in place check to see if it will clear.

Cheers,
Toby

Perfect, thanks!

 

anything