Show me your P10 with optic. . .

[Earl Keese]

I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.

[Hammer Time]

P-10S OR
Vortex Venom 6 MOA
J-Point sights

[Earl Keese]

P-10S OR
Vortex Venom 6 MOA
J-Point sights

Nice! Do you have heights or a p/n for the sights?

[Hammer Time]

Nice! Do you have heights or a p/n for the sights?

Unfortunately I was not able to get the exact sight height measurements, but they came in this kit with the correct optic adapter plate:

https://www.midwayusa.com/product/102120373?pid=912362

[Earl Keese]

P-10S OR
Vortex Venom 6 MOA
J-Point sights

Nice! Do you have heights or a p/n for the sights?

Unfortunately I was not able to get the exact sight height measurements, but they came in this kit with the correct optic adapter plate:

https://www.midwayusa.com/product/102120373?pid=912362

That'll work! Thanks

[Earl Keese]

Gentlemen, please post the requested details with your pics, this is to help others who are considering adding an optic and tend to post questions about sight heights etc. Btw, those are some nice looking P10's! Thanks for sharing.

[kb377]

P10C OR

- Holosun 507c X2
- CZ adaptor plate
- Night Fision Optic Ready sights (https://hbindustries.net/store/shop/cz-p10-optic-ready-tritium-sight-sets-by-night-fision/)

[Yankchef]

P10 c custom, milled for a dpp but running a 407k. Work done by NC engravers. Cerakote by gulf coast customs

Sent from my HD1907 using Tapatalk

[Joe L]

I put some details in the red dot and optics forum, but here is the short version of the results, using factory P-10S OR slide and sights, with a CZCustom PT-9 plate and shortened sight screws that came with the Holosun sight.  Good co-witness in my opinion, and the sight width is perfect for the narrow slide pistol.



You MUST shorten the M4 screws for the sight to plate by about 4 threads otherwise they will bottom out on the slide before the sight is tight. 

Joe

[KineticAp1]

Currently.... some to be a C upper with an SRO optic


Sent from my iPhone using Tapatalk

[KineticAp1]

Currently.... some to be a C upper with an SRO optic


Sent from my iPhone using Tapatalk

ATEI slide mill

RMR 06 type 2

Dawson P09 #019-512 .280 tall front sight
Ameriglo GLT 507 rear


Sent from my iPhone using Tapatalk

[KineticAp1]

Southwest Precision slide mill

RMR 06

Dawson  019-474 CZ front .265 tall.
Dawson  018-702 Glock rear .375 tall


Sent from my iPhone using Tapatalk

[SEAKPhotog]

I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.

P10C - Czech made
Holosun 507c
Glock sights
Killer Innovation threaded barrel
HB Industries Theta trigger
OLight PL Pro Valkyre
Milling and camo cerakote by Primary Machine

p10c by Joe, on Flickr

[Earl Keese]

I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.

P10C - Czech made
Holosun 507c
Glock sights
Killer Innovation threaded barrel
HB Industries Theta trigger
OLight PL Pro Valkyre
Milling and camo cerakote by Primary Machine

p10c by Joe, on Flickr

Nice looking P10. Do you have specs for the back up sights?

[lakefun42]

Hammertime, I have the exact same set up except I have yet to replace the rear sight.  can you post a pic of the sight picture? also, how easy is the removal and replacement of the rear sight with the J point sights?  I do not have a sight pusher.  thanks.