Author Topic: Cajun Gun Works has a Tool Kit  (Read 1737 times)

0 Members and 1 Guest are viewing this topic.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6116
Cajun Gun Works has a Tool Kit
« on: September 14, 2021, 08:30:59 PM »
Cajun Gun Works Tool Kit

https://cajungunworks.com/product/cajun-gun-works-tool-kit/

I just noticed that CGW has a tool kit. This should be helpful for some of those that are new to working on CZs.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline William_Broadus

  • Jr. Member
  • **
  • Posts: 79
Re: Cajun Gun Works has a Tool Kit
« Reply #1 on: September 14, 2021, 08:50:42 PM »
Cool

Sent from my SM-G935V using Tapatalk


Offline Philipl

  • Full Member
  • ***
  • Posts: 135
Re: Cajun Gun Works has a Tool Kit
« Reply #2 on: September 15, 2021, 06:12:33 AM »
Nice set. The starter punch is an absolute must have to change the hammer and disconnector.

Offline Lock-n-load

  • Sr. Member
  • ****
  • Posts: 688
Re: Cajun Gun Works has a Tool Kit
« Reply #3 on: September 15, 2021, 08:40:47 PM »
Nice set🧐

Online 2morechains

  • Hero Member
  • *****
  • Posts: 1034
Re: Cajun Gun Works has a Tool Kit
« Reply #4 on: September 15, 2021, 11:52:40 PM »
Be nice if they made something similar to Eemann Tech’s tool for holding the TRS during install.  It’s a little aluminum stick with a C-shape cut out on the end that the TRS coil fits into.  Be easier than using needle nose pliers. 

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6116
Re: Cajun Gun Works has a Tool Kit
« Reply #5 on: September 16, 2021, 12:59:57 AM »
Be nice if they made something similar to Eemann Tech’s tool for holding the TRS during install.  It’s a little aluminum stick with a C-shape cut out on the end that the TRS coil fits into.  Be easier than using needle nose pliers.

Slave pin for the win.
Will work for CZ pics! (including but not limited to all CZ clones)

Online 2morechains

  • Hero Member
  • *****
  • Posts: 1034
Re: Cajun Gun Works has a Tool Kit
« Reply #6 on: September 16, 2021, 12:05:24 PM »
Be nice if they made something similar to Eemann Tech’s tool for holding the TRS during install.  It’s a little aluminum stick with a C-shape cut out on the end that the TRS coil fits into.  Be easier than using needle nose pliers.

Slave pin for the win.

True, but the slave-pin method requires a lot of dis-assembly of the gun.  Easier when in the field (i.e. at a match) to use a pair of needle nose pliers to hold the TRS in place in conjunction with a punch  through the trigger pin hole works pretty well and you don’t run the risk of losing small parts while working at a Safety Area table (i.e. right side detent)

Online 2morechains

  • Hero Member
  • *****
  • Posts: 1034
Re: Cajun Gun Works has a Tool Kit
« Reply #7 on: September 16, 2021, 12:09:59 PM »
Found an Eemann Tech video show-casing the tool I was talking about above and how he uses it. 


Offline jurek

  • Hero Member
  • *****
  • Posts: 1460
  • NRA Pistol Instructor, RSO
Re: Cajun Gun Works has a Tool Kit
« Reply #8 on: September 16, 2021, 12:31:17 PM »
Nice tool.. so simple  :)
I'm not against, but tweezers are doing the same for me.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6116
Re: Cajun Gun Works has a Tool Kit
« Reply #9 on: September 16, 2021, 03:51:12 PM »
It is a neat tool and 2morechains makes a valid point about working in the field. $30.00 + Shipping for the tool over a modified pair of pliers was a tough sell for me when it came out, so i passed.
« Last Edit: September 20, 2021, 03:52:26 AM by Tok36, Reason: Spelling. »
Will work for CZ pics! (including but not limited to all CZ clones)

Offline StarDude

  • Newbie
  • *
  • Posts: 4
Re: Cajun Gun Works has a Tool Kit
« Reply #10 on: September 20, 2021, 03:44:10 AM »
Awesome! Thanks for sharing

Offline mrcabinet

  • Full Member
  • ***
  • Posts: 476
Re: Cajun Gun Works has a Tool Kit
« Reply #11 on: September 25, 2021, 09:27:11 PM »
I made my own custom tool for the TRS - a 1/4" wide scrap of wood with a notch cut in the end to push the spring down. Cost all of $0.00.
No matter where you're going, there you are.

Offline thaoch

  • Newbie
  • *
  • Posts: 5
Re: Cajun Gun Works has a Tool Kit
« Reply #12 on: October 01, 2021, 08:09:14 PM »
Nice!

Offline sechip

  • Newbie
  • *
  • Posts: 15
Re: Cajun Gun Works has a Tool Kit
« Reply #13 on: October 09, 2021, 08:59:12 AM »
I dig it!